On 08/09/20 10:29 pm, Grygorii Strashko wrote: > Hi All, > > arm64: dts: ti: k3-j7200: add dma and mcu cpsw nodes > > This series adds DT nodes for TI J7200 SoC > - INTR/INTA, Ringacc and UDMA nodes for Main and MCU NAVSS, which are > compatible > with J721E Soc, to enable DMA support > - MCU CPSW2g DT nodes to enable networking https://pastebin.ubuntu.com/p/FPVggcdQ6T/ Tested-by: Kishon Vijay Abraham I <[email protected]> Thanks Kishon > > This series depends on: > - [PATCH v2 0/4] arm64: Initial support for Texas Instrument's J7200 > Platform [1] > from: Lokesh Vutla <[email protected]> > - [PATCH] soc: ti: k3-socinfo: Add entry for J7200 [2] > from: Peter Ujfalusi <[email protected]> > - [PATCH] dmaengine: ti: k3-udma: Use soc_device_match() for SoC dependent > parameters [3] > from: Peter Ujfalusi <[email protected]> > > [1] > https://lore.kernel.org/linux-arm-kernel/[email protected]/T/#m141ae4d0dd818518c00c81806d689983d6e832e6 > [2] https://lore.kernel.org/patchwork/patch/1283230/ > [3] https://lore.kernel.org/lkml/[email protected]/ > > Changes in v2: > - fixed DT build warnings (Nishanth Menon) > > v1: https://lore.kernel.org/patchwork/cover/1301067/ > > Grygorii Strashko (3): > arm64: dts: ti: k3-j7200-main: add main navss cpts node > arm64: dts: ti: k3-j7200-mcu: add mcu cpsw nuss node > arm64: dts: ti: k3-j7200-common-proc-board: add mcu cpsw nuss pinmux > and phy defs > > Peter Ujfalusi (1): > arm64: dts: ti: k3-j7200: add DMA support > > .../dts/ti/k3-j7200-common-proc-board.dts | 45 +++++++ > arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 73 +++++++++++ > .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 118 ++++++++++++++++++ > 3 files changed, 236 insertions(+) >
