Camel
On 9/11/20 3:07 AM, Camel Guo wrote:
From: Camel Guo <cam...@axis.com>
Add support to configure the GPIO pin to the specific configuration.
The GPIO pin can be configured as GPO, IRQ, SDOUT2, PDMCLK, MICBASE_EN,
GPI, MCLK, SDIN, PDMDIN1, PDMDIN2, PDMDIN3 or PDMDIN4 and the output
drive can be configured with various configuration.
Signed-off-by: Camel Guo <cam...@axis.com>
---
sound/soc/codecs/tlv320adcx140.c | 44 ++++++++++++++++++++++++++++++++
sound/soc/codecs/tlv320adcx140.h | 4 +++
2 files changed, 48 insertions(+)
diff --git a/sound/soc/codecs/tlv320adcx140.c b/sound/soc/codecs/tlv320adcx140.c
index f33ee604ee78..97f16fbba441 100644
--- a/sound/soc/codecs/tlv320adcx140.c
+++ b/sound/soc/codecs/tlv320adcx140.c
@@ -837,6 +837,46 @@ static int adcx140_configure_gpo(struct adcx140_priv
*adcx140)
}
+static int adcx140_configure_gpio(struct adcx140_priv *adcx140)
+{
+ int gpio_count = 0;
+ u32 gpio_outputs[2];
This is #defined in configure_gpo and configure_gpi would like to see
the consistency here.
+ u32 gpio_output_val = 0;
+ int ret;
+
+ gpio_count = device_property_count_u32(adcx140->dev,
+ "ti,gpio-config");
+ if (gpio_count == 0)
+ return 0;
+
+ if (gpio_count != 2)
Same comment as above.
+ return -EINVAL;
+
+ ret = device_property_read_u32_array(adcx140->dev, "ti,gpio-config",
+ gpio_outputs, gpio_count);
+ if (ret)
+ return ret;
+
+ if (gpio_outputs[0] > ADCX140_GPIO_CFG_MAX) {
+ dev_err(adcx140->dev, "GPIO config out of range\n");
+ return -EINVAL;
+ }
+
+ if (gpio_outputs[1] > ADCX140_GPIO_DRV_MAX) {
+ dev_err(adcx140->dev, "GPIO drive out of range\n");
+ return -EINVAL;
+ }
+
+ gpio_output_val = gpio_outputs[0] << ADCX140_GPIO_SHIFT
+ | gpio_outputs[1];
+
+ ret = regmap_write(adcx140->regmap, ADCX140_GPIO_CFG0, gpio_output_val);
+ if (ret)
+ return ret;
Just do return regmap_write no reason to check it. It is checked by the
caller.
Dan
