In a further commit we'll have to get rid of the update_cr0() callback and
define a DW SSI capability instead. Since Keem Bay master/slave
functionality is controller by the CTRL0 register bitfield, we need to
first move the master mode selection into the internal corresponding
update_cr0 method, which would be activated by means of the dedicated
DW_SPI_CAP_KEEMBAY_MST capability setup.
Note this will be also useful if the driver will be ever altered to
support the DW SPI slave interface.
Signed-off-by: Serge Semin <sergey.se...@baikalelectronics.ru>
---
drivers/spi/spi-dw-core.c | 4 ++++
drivers/spi/spi-dw-mmio.c | 20 +++-----------------
drivers/spi/spi-dw.h | 8 ++++++++
3 files changed, 15 insertions(+), 17 deletions(-)
diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index 78e5af8ed173..8f9737640ec1 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -252,6 +252,7 @@ u32 dw_spi_update_cr0_v1_01a(struct spi_controller *master,
struct spi_device *spi,
struct spi_transfer *transfer)
{
+ struct dw_spi *dws = spi_controller_get_devdata(master);
struct chip_data *chip = spi_get_ctldata(spi);
u32 cr0;
@@ -275,6 +276,9 @@ u32 dw_spi_update_cr0_v1_01a(struct spi_controller *master,
/* CTRLR0[13] Shift Register Loop */
cr0 |= ((spi->mode & SPI_LOOP) ? 1 : 0) << DWC_SSI_CTRLR0_SRL_OFFSET;
+ if (dws->caps & DW_SPI_CAP_KEEMBAY_MST)
+ cr0 |= DWC_SSI_CTRLR0_KEEMBAY_MST;
+
return cr0;
}
EXPORT_SYMBOL_GPL(dw_spi_update_cr0_v1_01a);
diff --git a/drivers/spi/spi-dw-mmio.c b/drivers/spi/spi-dw-mmio.c
index 7111cb7ca23b..c0d351fde782 100644
--- a/drivers/spi/spi-dw-mmio.c
+++ b/drivers/spi/spi-dw-mmio.c
@@ -48,13 +48,6 @@ struct dw_spi_mmio {
#define SPARX5_FORCE_ENA 0xa4
#define SPARX5_FORCE_VAL 0xa8
-/*
- * For Keem Bay, CTRLR0[31] is used to select controller mode.
- * 0: SSI is slave
- * 1: SSI is master
- */
-#define KEEMBAY_CTRLR0_SSIC_IS_MST BIT(31)
-
struct dw_spi_mscc {
struct regmap *syscon;
void __iomem *spi_mst; /* Not sparx5 */
@@ -234,20 +227,13 @@ static int dw_spi_dwc_ssi_init(struct platform_device
*pdev,
return 0;
}
-static u32 dw_spi_update_cr0_keembay(struct spi_controller *master,
- struct spi_device *spi,
- struct spi_transfer *transfer)
-{
- u32 cr0 = dw_spi_update_cr0_v1_01a(master, spi, transfer);
-
- return cr0 | KEEMBAY_CTRLR0_SSIC_IS_MST;
-}
-
static int dw_spi_keembay_init(struct platform_device *pdev,
struct dw_spi_mmio *dwsmmio)
{
+ dwsmmio->dws.caps = DW_SPI_CAP_KEEMBAY_MST;
+
/* Register hook to configure CTRLR0 */
- dwsmmio->dws.update_cr0 = dw_spi_update_cr0_keembay;
+ dwsmmio->dws.update_cr0 = dw_spi_update_cr0_v1_01a;
return 0;
}
diff --git a/drivers/spi/spi-dw.h b/drivers/spi/spi-dw.h
index 4c748b2853a8..da9b543322c9 100644
--- a/drivers/spi/spi-dw.h
+++ b/drivers/spi/spi-dw.h
@@ -71,6 +71,13 @@
#define DWC_SSI_CTRLR0_FRF_OFFSET 6
#define DWC_SSI_CTRLR0_DFS_OFFSET 0
+/*
+ * For Keem Bay, CTRLR0[31] is used to select controller mode.
+ * 0: SSI is slave
+ * 1: SSI is master
+ */
+#define DWC_SSI_CTRLR0_KEEMBAY_MST BIT(31)
+
/* Bit fields in SR, 7 bits */
#define SR_MASK 0x7f /* cover 7 bits
*/
#define SR_BUSY (1 << 0)
@@ -101,6 +108,7 @@ enum dw_ssi_type {
/* DW SPI capabilities */
#define DW_SPI_CAP_CS_OVERRIDE BIT(0)
+#define DW_SPI_CAP_KEEMBAY_MST BIT(1)
struct dw_spi;
struct dw_spi_dma_ops {
--
2.27.0
