This is a long overdue revival of an old series that prepares support for more HDMI modes, YUV420 and 10-bit output on RK3228/RK3328.
This v3 series contains the original v2 patches targeting the inno hdmi phy driver, a separate series targeting drm driver should follow in a few days. Part of this has been reworked from vendor BSP 4.4 kernel commits. Patch 1-5 fixes issues and shortcomings in the inno hdmi phy driver. Patch 6 adds support for more pixel clock rates in order to support common DMT modes in addition to CEA modes. Changes in v3: - split series - drop drm and device tree changes Changes in v2: - collect acked-by tag - drop the limit resolution width to 3840 patch This series is also available at [1]. [1] https://github.com/Kwiboo/linux-rockchip/commits/next-20200922-inno-hdmi-phy Regards, Jonas Algea Cao (1): phy/rockchip: inno-hdmi: Support more pre-pll configuration Huicong Xu (1): phy/rockchip: inno-hdmi: force set_rate on power_on Jonas Karlman (3): phy/rockchip: inno-hdmi: use correct vco_div_5 macro on rk3328 phy/rockchip: inno-hdmi: remove unused no_c from rk3328 recalc_rate phy/rockchip: inno-hdmi: do not power on rk3328 post pll on reg write Zheng Yang (1): phy/rockchip: inno-hdmi: round fractal pixclock in rk3328 recalc_rate drivers/phy/rockchip/phy-rockchip-inno-hdmi.c | 110 ++++++++++++------ 1 file changed, 74 insertions(+), 36 deletions(-) -- 2.17.1
