When a DSA switch driver needs to call dsa_untag_bridge_pvid(), it can
set dsa_switch::untag_brige_pvid to indicate this is necessary.
This is a pre-requisite to making sure that we are always calling
dsa_untag_bridge_pvid() after eth_type_trans() has been called.
Signed-off-by: Florian Fainelli <f.faine...@gmail.com>
---
include/net/dsa.h | 8 ++++++++
net/dsa/dsa.c | 9 +++++++++
2 files changed, 17 insertions(+)
diff --git a/include/net/dsa.h b/include/net/dsa.h
index b502a63d196e..8b0696e08cac 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -308,6 +308,14 @@ struct dsa_switch {
*/
bool configure_vlan_while_not_filtering;
+ /* If the switch driver always programs the CPU port as egress tagged
+ * despite the VLAN configuration indicating otherwise, then setting
+ * @untag_bridge_pvid will force the DSA receive path to pop the
bridge's
+ * default_pvid VLAN tagged frames to offer a consistent behavior
+ * between a vlan_filtering=0 and vlan_filtering=1 bridge device.
+ */
+ bool untag_bridge_pvid;
+
/* In case vlan_filtering_is_global is set, the VLAN awareness state
* should be retrieved from here and not from the per-port settings.
*/
diff --git a/net/dsa/dsa.c b/net/dsa/dsa.c
index 5c18c0214aac..dec4ab59b7c4 100644
--- a/net/dsa/dsa.c
+++ b/net/dsa/dsa.c
@@ -225,6 +225,15 @@ static int dsa_switch_rcv(struct sk_buff *skb, struct
net_device *dev,
skb->pkt_type = PACKET_HOST;
skb->protocol = eth_type_trans(skb, skb->dev);
+ if (unlikely(cpu_dp->ds->untag_bridge_pvid)) {
+ nskb = dsa_untag_bridge_pvid(skb);
+ if (!nskb) {
+ kfree_skb(skb);
+ return 0;
+ }
+ skb = nskb;
+ }
+
s = this_cpu_ptr(p->stats64);
u64_stats_update_begin(&s->syncp);
s->rx_packets++;
--
2.25.1
