The convention for node names is to use hyphens, not underscores.
dtschema for pca95xx expects GPIO hogs to end with 'hog' suffix.
Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
---
.../boot/dts/mediatek/pumpkin-common.dtsi | 26 +++++++++----------
1 file changed, 13 insertions(+), 13 deletions(-)
The dt-schema changes were applied.
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index 29d8cf6df46b..351a1905a074 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -63,91 +63,91 @@
gpio-controller;
#gpio-cells = <2>;
- eint20_mux_sel0 {
+ eint20-mux-sel0-hog {
gpio-hog;
gpios = <0 0>;
input;
line-name = "eint20_mux_sel0";
};
- expcon_mux_sel1 {
+ expcon-mux-sel1-hog {
gpio-hog;
gpios = <1 0>;
input;
line-name = "expcon_mux_sel1";
};
- mrg_di_mux_sel2 {
+ mrg-di-mux-sel2-hog {
gpio-hog;
gpios = <2 0>;
input;
line-name = "mrg_di_mux_sel2";
};
- sd_sdio_mux_sel3 {
+ sd-sdio-mux-sel3-hog {
gpio-hog;
gpios = <3 0>;
input;
line-name = "sd_sdio_mux_sel3";
};
- sd_sdio_mux_ctrl7 {
+ sd-sdio-mux-ctrl7-hog {
gpio-hog;
gpios = <7 0>;
output-low;
line-name = "sd_sdio_mux_ctrl7";
};
- hw_id0 {
+ hw-id0-hog {
gpio-hog;
gpios = <8 0>;
input;
line-name = "hw_id0";
};
- hw_id1 {
+ hw-id1-hog {
gpio-hog;
gpios = <9 0>;
input;
line-name = "hw_id1";
};
- hw_id2 {
+ hw-id2-hog {
gpio-hog;
gpios = <10 0>;
input;
line-name = "hw_id2";
};
- fg_int_n {
+ fg-int-n-hog {
gpio-hog;
gpios = <11 0>;
input;
line-name = "fg_int_n";
};
- usba_pwr_en {
+ usba-pwr-en-hog {
gpio-hog;
gpios = <12 0>;
output-high;
line-name = "usba_pwr_en";
};
- wifi_3v3_pg {
+ wifi-3v3-pg-hog {
gpio-hog;
gpios = <13 0>;
input;
line-name = "wifi_3v3_pg";
};
- cam_rst {
+ cam-rst-hog {
gpio-hog;
gpios = <14 0>;
output-low;
line-name = "cam_rst";
};
- cam_pwdn {
+ cam-pwdn-hog {
gpio-hog;
gpios = <15 0>;
output-low;
--
2.17.1
