From: Damien Le Moal <damien.lem...@wdc.com> commit 27ba3e8ff3ab86449e63d38a8d623053591e65fa upstream.
When CONFIG_BLK_DEV_ZONED is disabled, allow using host-aware ZBC disks as regular disks. In this case, ensure that command completion is correctly executed by changing sd_zbc_complete() to return good_bytes instead of 0 and causing a hang during device probe (endless retries). When CONFIG_BLK_DEV_ZONED is enabled and a host-aware disk is detected to have partitions, it will be used as a regular disk. In this case, make sure to not do anything in sd_zbc_revalidate_zones() as that triggers warnings. Since all these different cases result in subtle settings of the disk queue zoned model, introduce the block layer helper function blk_queue_set_zoned() to generically implement setting up the effective zoned model according to the disk type, the presence of partitions on the disk and CONFIG_BLK_DEV_ZONED configuration. Link: https://lore.kernel.org/r/20200915073347.832424-2-damien.lem...@wdc.com Fixes: b72053072c0b ("block: allow partitions on host aware zone devices") Cc: <sta...@vger.kernel.org> Reported-by: Borislav Petkov <b...@alien8.de> Suggested-by: Christoph Hellwig <h...@infradead.org> Reviewed-by: Christoph Hellwig <h...@lst.de> Reviewed-by: Johannes Thumshirn <johannes.thumsh...@wdc.com> Signed-off-by: Damien Le Moal <damien.lem...@wdc.com> Signed-off-by: Martin K. Petersen <martin.peter...@oracle.com> Signed-off-by: Greg Kroah-Hartman <gre...@linuxfoundation.org> --- block/blk-settings.c | 46 ++++++++++++++++++++++++++++++++++++++++++++++ drivers/scsi/sd.c | 30 ++++++++++++++++++------------ drivers/scsi/sd.h | 2 +- drivers/scsi/sd_zbc.c | 37 ++++++++++++++++++++++--------------- include/linux/blkdev.h | 2 ++ 5 files changed, 89 insertions(+), 28 deletions(-) --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -832,6 +832,52 @@ bool blk_queue_can_use_dma_map_merging(s } EXPORT_SYMBOL_GPL(blk_queue_can_use_dma_map_merging); +/** + * blk_queue_set_zoned - configure a disk queue zoned model. + * @disk: the gendisk of the queue to configure + * @model: the zoned model to set + * + * Set the zoned model of the request queue of @disk according to @model. + * When @model is BLK_ZONED_HM (host managed), this should be called only + * if zoned block device support is enabled (CONFIG_BLK_DEV_ZONED option). + * If @model specifies BLK_ZONED_HA (host aware), the effective model used + * depends on CONFIG_BLK_DEV_ZONED settings and on the existence of partitions + * on the disk. + */ +void blk_queue_set_zoned(struct gendisk *disk, enum blk_zoned_model model) +{ + switch (model) { + case BLK_ZONED_HM: + /* + * Host managed devices are supported only if + * CONFIG_BLK_DEV_ZONED is enabled. + */ + WARN_ON_ONCE(!IS_ENABLED(CONFIG_BLK_DEV_ZONED)); + break; + case BLK_ZONED_HA: + /* + * Host aware devices can be treated either as regular block + * devices (similar to drive managed devices) or as zoned block + * devices to take advantage of the zone command set, similarly + * to host managed devices. We try the latter if there are no + * partitions and zoned block device support is enabled, else + * we do nothing special as far as the block layer is concerned. + */ + if (!IS_ENABLED(CONFIG_BLK_DEV_ZONED) || + disk_has_partitions(disk)) + model = BLK_ZONED_NONE; + break; + case BLK_ZONED_NONE: + default: + if (WARN_ON_ONCE(model != BLK_ZONED_NONE)) + model = BLK_ZONED_NONE; + break; + } + + disk->queue->limits.zoned = model; +} +EXPORT_SYMBOL_GPL(blk_queue_set_zoned); + static int __init blk_settings_init(void) { blk_max_low_pfn = max_low_pfn - 1; --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -2966,26 +2966,32 @@ static void sd_read_block_characteristic if (sdkp->device->type == TYPE_ZBC) { /* Host-managed */ - q->limits.zoned = BLK_ZONED_HM; + blk_queue_set_zoned(sdkp->disk, BLK_ZONED_HM); } else { sdkp->zoned = (buffer[8] >> 4) & 3; - if (sdkp->zoned == 1 && !disk_has_partitions(sdkp->disk)) { + if (sdkp->zoned == 1) { /* Host-aware */ - q->limits.zoned = BLK_ZONED_HA; + blk_queue_set_zoned(sdkp->disk, BLK_ZONED_HA); } else { - /* - * Treat drive-managed devices and host-aware devices - * with partitions as regular block devices. - */ - q->limits.zoned = BLK_ZONED_NONE; - if (sdkp->zoned == 2 && sdkp->first_scan) - sd_printk(KERN_NOTICE, sdkp, - "Drive-managed SMR disk\n"); + /* Regular disk or drive managed disk */ + blk_queue_set_zoned(sdkp->disk, BLK_ZONED_NONE); } } - if (blk_queue_is_zoned(q) && sdkp->first_scan) + + if (!sdkp->first_scan) + goto out; + + if (blk_queue_is_zoned(q)) { sd_printk(KERN_NOTICE, sdkp, "Host-%s zoned block device\n", q->limits.zoned == BLK_ZONED_HM ? "managed" : "aware"); + } else { + if (sdkp->zoned == 1) + sd_printk(KERN_NOTICE, sdkp, + "Host-aware SMR disk used as regular disk\n"); + else if (sdkp->zoned == 2) + sd_printk(KERN_NOTICE, sdkp, + "Drive-managed SMR disk\n"); + } out: kfree(buffer); --- a/drivers/scsi/sd.h +++ b/drivers/scsi/sd.h @@ -260,7 +260,7 @@ static inline blk_status_t sd_zbc_setup_ static inline unsigned int sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes, struct scsi_sense_hdr *sshdr) { - return 0; + return good_bytes; } static inline blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, --- a/drivers/scsi/sd_zbc.c +++ b/drivers/scsi/sd_zbc.c @@ -645,9 +645,18 @@ static int sd_zbc_revalidate_zones(struc unsigned int nr_zones) { struct gendisk *disk = sdkp->disk; + struct request_queue *q = disk->queue; + u32 max_append; int ret = 0; /* + * There is nothing to do for regular disks, including host-aware disks + * that have partitions. + */ + if (!blk_queue_is_zoned(q)) + return 0; + + /* * Make sure revalidate zones are serialized to ensure exclusive * updates of the scsi disk data. */ @@ -681,6 +690,19 @@ static int sd_zbc_revalidate_zones(struc kvfree(sdkp->rev_wp_offset); sdkp->rev_wp_offset = NULL; + if (ret) { + sdkp->zone_blocks = 0; + sdkp->nr_zones = 0; + sdkp->capacity = 0; + goto unlock; + } + + max_append = min_t(u32, logical_to_sectors(sdkp->device, zone_blocks), + q->limits.max_segments << (PAGE_SHIFT - 9)); + max_append = min_t(u32, max_append, queue_max_hw_sectors(q)); + + blk_queue_max_zone_append_sectors(q, max_append); + unlock: mutex_unlock(&sdkp->rev_mutex); @@ -693,7 +715,6 @@ int sd_zbc_read_zones(struct scsi_disk * struct request_queue *q = disk->queue; unsigned int nr_zones; u32 zone_blocks = 0; - u32 max_append; int ret; if (!sd_is_zoned(sdkp)) @@ -726,20 +747,6 @@ int sd_zbc_read_zones(struct scsi_disk * if (ret) goto err; - /* - * On the first scan 'chunk_sectors' isn't setup yet, so calling - * blk_queue_max_zone_append_sectors() will result in a WARN(). Defer - * this setting to the second scan. - */ - if (sdkp->first_scan) - return 0; - - max_append = min_t(u32, logical_to_sectors(sdkp->device, zone_blocks), - q->limits.max_segments << (PAGE_SHIFT - 9)); - max_append = min_t(u32, max_append, queue_max_hw_sectors(q)); - - blk_queue_max_zone_append_sectors(q, max_append); - return 0; err: --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -354,6 +354,8 @@ struct queue_limits { typedef int (*report_zones_cb)(struct blk_zone *zone, unsigned int idx, void *data); +void blk_queue_set_zoned(struct gendisk *disk, enum blk_zoned_model model); + #ifdef CONFIG_BLK_DEV_ZONED #define BLK_ALL_ZONES ((unsigned int)-1)
