On Sun, Sep 27, 2020 at 12:00 PM Krzysztof Kozlowski <[email protected]> wrote:
>
> The PMIC's interrupt is level low and should be pulled up. The PMIC's
> device node had pinctrl-0 property but it lacked pinctrl-names which
> is required to apply the pin configuration.
>
Thanks for the fixes!
> Fixes: 5f67317bd967 ("arm64: dts: imx8mm: correct interrupt flags")
> Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development
> kit")
> Signed-off-by: Krzysztof Kozlowski <[email protected]>
Tested-by: Adam Ford <[email protected]>
> ---
> arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> index 6de86a4f0ec4..55b36bddd513 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
> @@ -72,6 +72,7 @@
> pmic@4b {
> compatible = "rohm,bd71847";
> reg = <0x4b>;
> + pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_pmic>;
> interrupt-parent = <&gpio1>;
> interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
> --
> 2.17.1
>
