Use <> to separate the values of property-units will be treated as multiple arrays. The errors similar to the following will be reported by property-units.yaml.
ufs@ff3c0000: freq-table-hz: [[0, 0], [0, 0]] is too long Signed-off-by: Zhen Lei <[email protected]> --- arch/arm64/boot/dts/hisilicon/hi3660.dtsi | 3 ++- arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 3 ++- arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 9 ++++----- 3 files changed, 8 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi index 994140fbc916eea..3f6b1715835af06 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3660.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3660.dtsi @@ -1045,7 +1045,8 @@ clocks = <&crg_ctrl HI3660_CLK_GATE_UFSIO_REF>, <&crg_ctrl HI3660_CLK_GATE_UFSPHY_CFG>; clock-names = "ref_clk", "phy_clk"; - freq-table-hz = <0 0>, <0 0>; + freq-table-hz = <0 0 + 0 0>; /* offset: 0x84; bit: 12 */ resets = <&crg_rst 0x84 12>; reset-names = "rst"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi index 2dcffa3ed2189eb..668977d1acba94c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3670.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3670.dtsi @@ -667,7 +667,8 @@ clocks = <&crg_ctrl HI3670_CLK_GATE_UFSIO_REF>, <&crg_ctrl HI3670_CLK_GATE_UFS_SUBSYS>; clock-names = "ref_clk", "phy_clk"; - freq-table-hz = <0 0>, <0 0>; + freq-table-hz = <0 0 + 0 0>; /* offset: 0x84; bit: 12 */ resets = <&crg_rst 0x84 12>; reset-names = "rst"; diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi index 12bc1d3ed4243f5..993998ac27c503c 100644 --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi @@ -91,11 +91,10 @@ gmacphyrst: reset-controller { compatible = "ti,syscon-reset"; #reset-cells = <1>; - ti,reset-bits = - <0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | - DEASSERT_SET|STATUS_NONE)>, - <0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | - DEASSERT_SET|STATUS_NONE)>; + ti,reset-bits = < + 0xcc 12 0xcc 12 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE) + 0xcc 13 0xcc 13 0 0 (ASSERT_CLEAR | DEASSERT_SET | STATUS_NONE) + >; }; }; -- 1.8.3
