> > On Mon, Sep 28, 2020 at 06:43:26PM +0800, Biwen Li wrote: > > From: Reinhard Pfau <p...@gdsys.de> > > > > Add support for SMSC EMC2305, EMC2303, EMC2302, EMC2301 fan controller > > chips. > > The driver primary supports the EMC2305 chip which provides RPM-based > > PWM control and monitoring for up to 5 fans. > > > > According to the SMSC data sheets the EMC2303, EMC2302 and EMC2301 > > chips have basically the same functionality and register layout, but > > support less fans and (in case of EMC2302 and EMC2301) less possible I2C > addresses. > > The driver supports them, too. > > > > The driver supports configuration via devicetree. This can also be > > used to restrict the fans exposed via sysfs (see doc for details). > > > > Signed-off-by: Reinhard Pfau <p...@gdsys.de> > > Signed-off-by: Biwen Li <biwen...@nxp.com> > > --- > > .../devicetree/bindings/hwmon/emc2305.txt | 33 + > > Split to a separate patch and should be in DT schema format. > checkpatch.pl will tell you both of these things. Okay, got it, thanks. > > > Documentation/hwmon/emc2305.rst | 34 + > > MAINTAINERS | 8 + > > drivers/hwmon/Kconfig | 10 + > > drivers/hwmon/Makefile | 1 + > > drivers/hwmon/emc2305.c | 689 > ++++++++++++++++++ > > 6 files changed, 775 insertions(+) > > create mode 100644 > > Documentation/devicetree/bindings/hwmon/emc2305.txt > > create mode 100644 Documentation/hwmon/emc2305.rst create mode > > 100644 drivers/hwmon/emc2305.c
