Add information found in downstream kernels, to make the code less
magic.

Signed-off-by: Michał Mirosław <mirq-li...@rere.qmqm.pl>
Reviewed-by: Dmitry Osipenko <dig...@gmail.com>
Tested-by: Dmitry Osipenko <dig...@gmail.com>
---
 drivers/input/touchscreen/elants_i2c.c | 18 +++++++++++++-----
 1 file changed, 13 insertions(+), 5 deletions(-)

diff --git a/drivers/input/touchscreen/elants_i2c.c 
b/drivers/input/touchscreen/elants_i2c.c
index 50c348297e38..d51cb910fba1 100644
--- a/drivers/input/touchscreen/elants_i2c.c
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -82,7 +82,7 @@
 
 #define HEADER_REPORT_10_FINGER        0x62
 
-/* Header (4 bytes) plus 3 fill 10-finger packets */
+/* Header (4 bytes) plus 3 full 10-finger packets */
 #define MAX_PACKET_SIZE                169
 
 #define BOOT_TIME_DELAY_MS     50
@@ -97,6 +97,10 @@
 #define E_INFO_PHY_SCAN                0xD7
 #define E_INFO_PHY_DRIVER      0xD8
 
+/* FW write command, 0x54 0x?? 0x0, 0x01 */
+#define E_POWER_STATE_SLEEP    0x50
+#define E_POWER_STATE_RESUME   0x58
+
 #define MAX_RETRIES            3
 #define MAX_FW_UPDATE_RETRIES  30
 
@@ -269,8 +273,8 @@ static int elants_i2c_calibrate(struct elants_data *ts)
 {
        struct i2c_client *client = ts->client;
        int ret, error;
-       static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
-       static const u8 rek[] = { 0x54, 0x29, 0x00, 0x01 };
+       static const u8 w_flashkey[] = { CMD_HEADER_WRITE, 0xC0, 0xE1, 0x5A };
+       static const u8 rek[] = { CMD_HEADER_WRITE, 0x29, 0x00, 0x01 };
        static const u8 rek_resp[] = { CMD_HEADER_REK, 0x66, 0x66, 0x66 };
 
        disable_irq(client->irq);
@@ -1388,7 +1392,9 @@ static int __maybe_unused elants_i2c_suspend(struct 
device *dev)
 {
        struct i2c_client *client = to_i2c_client(dev);
        struct elants_data *ts = i2c_get_clientdata(client);
-       const u8 set_sleep_cmd[] = { 0x54, 0x50, 0x00, 0x01 };
+       const u8 set_sleep_cmd[] = {
+               CMD_HEADER_WRITE, E_POWER_STATE_SLEEP, 0x00, 0x01
+       };
        int retry_cnt;
        int error;
 
@@ -1425,7 +1431,9 @@ static int __maybe_unused elants_i2c_resume(struct device 
*dev)
 {
        struct i2c_client *client = to_i2c_client(dev);
        struct elants_data *ts = i2c_get_clientdata(client);
-       const u8 set_active_cmd[] = { 0x54, 0x58, 0x00, 0x01 };
+       const u8 set_active_cmd[] = {
+               CMD_HEADER_WRITE, E_POWER_STATE_RESUME, 0x00, 0x01
+       };
        int retry_cnt;
        int error;
 
-- 
2.20.1

Reply via email to