The periph_clks[] array contains duplicated entry for Security Engine
clock which was meant to be defined for T210, but it wasn't added
properly. This patch corrects the T210 SE entry and fixes the following
error message on T114/T124: "Tegra clk 127: register failed with -17".
Fixes: dc37fec48314 ("clk: tegra: periph: Add new periph clks and muxes for
Tegra210")
Tested-by Nicolas Chauvet <[email protected]>
Reported-by Nicolas Chauvet <[email protected]>
Signed-off-by: Dmitry Osipenko <[email protected]>
---
drivers/clk/tegra/clk-id.h | 1 +
drivers/clk/tegra/clk-tegra-periph.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/tegra/clk-id.h b/drivers/clk/tegra/clk-id.h
index ff7da2d3e94d..24413812ec5b 100644
--- a/drivers/clk/tegra/clk-id.h
+++ b/drivers/clk/tegra/clk-id.h
@@ -227,6 +227,7 @@ enum clk_id {
tegra_clk_sdmmc4,
tegra_clk_sdmmc4_8,
tegra_clk_se,
+ tegra_clk_se_10,
tegra_clk_soc_therm,
tegra_clk_soc_therm_8,
tegra_clk_sor0,
diff --git a/drivers/clk/tegra/clk-tegra-periph.c
b/drivers/clk/tegra/clk-tegra-periph.c
index 2b2a3b81c16b..60cc34f90cb9 100644
--- a/drivers/clk/tegra/clk-tegra-periph.c
+++ b/drivers/clk/tegra/clk-tegra-periph.c
@@ -630,7 +630,7 @@ static struct tegra_periph_init_data periph_clks[] = {
INT8("host1x", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_HOST1X, 28, 0,
tegra_clk_host1x_8),
INT8("host1x",
mux_pllc4_out1_pllc_pllc4_out2_pllp_clkm_plla_pllc4_out0, CLK_SOURCE_HOST1X,
28, 0, tegra_clk_host1x_9),
INT8("se", mux_pllp_pllc2_c_c3_pllm_clkm, CLK_SOURCE_SE, 127,
TEGRA_PERIPH_ON_APB, tegra_clk_se),
- INT8("se", mux_pllp_pllc2_c_c3_clkm, CLK_SOURCE_SE, 127,
TEGRA_PERIPH_ON_APB, tegra_clk_se),
+ INT8("se", mux_pllp_pllc2_c_c3_clkm, CLK_SOURCE_SE, 127,
TEGRA_PERIPH_ON_APB, tegra_clk_se_10),
INT8("2d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_2D, 21, 0,
tegra_clk_gr2d_8),
INT8("3d", mux_pllm_pllc2_c_c3_pllp_plla, CLK_SOURCE_3D, 24, 0,
tegra_clk_gr3d_8),
INT8("vic03", mux_pllm_pllc_pllp_plla_pllc2_c3_clkm, CLK_SOURCE_VIC03,
178, 0, tegra_clk_vic03),
--
2.27.0
