New nodes are enabled by default, so status=okay is not needed for them.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
Not actually tested on the HW, just checked the output DTB.
---
arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index 143f45eaa953..bf92d126d59a 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -92,7 +92,6 @@ i2c_max98504: i2c-gpio-0 {
i2c-gpio,delay-us = <2>;
#address-cells = <1>;
#size-cells = <0>;
- status = "okay";
max98504: codec@31 {
compatible = "maxim,max98504";
--
2.25.1
