From: Jonathan Marek <[email protected]>
[ Upstream commit 79493db5bb573017767b4f48b0fc69bfd01b82d2 ]
The compatible for hsphy has out of place indentation, and the assigned
clock rate for GCC_USB30_PRIM_MASTER_CLK is incorrect, the clock doesn't
support a rate of 150000000. Use a rate of 200000000 to match downstream.
Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Signed-off-by: Jonathan Marek <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Bjorn Andersson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8150.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi
b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index b86a7ead30067..ab8680c6672e4 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -767,7 +767,7 @@ glink-edge {
usb_1_hsphy: phy@88e2000 {
compatible = "qcom,sm8150-usb-hs-phy",
-
"qcom,usb-snps-hs-7nm-phy";
+ "qcom,usb-snps-hs-7nm-phy";
reg = <0 0x088e2000 0 0x400>;
status = "disabled";
#phy-cells = <0>;
@@ -833,7 +833,7 @@ usb_1: usb@a6f8800 {
assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
<&gcc GCC_USB30_PRIM_MASTER_CLK>;
- assigned-clock-rates = <19200000>, <150000000>;
+ assigned-clock-rates = <19200000>, <200000000>;
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,
--
2.25.1
