The IMX258 sensor outputs pixels in GBGB/RGRG mode.  This is described
explicitly in datasheet and was actually mentioned in a comment inside
the driver.  Using other - wrong mode - leads to pinkish pictures.

Fixes: e4802cb00bfe ("media: imx258: Add imx258 camera sensor driver")
Cc: <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
 drivers/media/i2c/imx258.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/media/i2c/imx258.c b/drivers/media/i2c/imx258.c
index ef069333a969..bf75d4e597af 100644
--- a/drivers/media/i2c/imx258.c
+++ b/drivers/media/i2c/imx258.c
@@ -715,7 +715,7 @@ static int imx258_open(struct v4l2_subdev *sd, struct 
v4l2_subdev_fh *fh)
        /* Initialize try_fmt */
        try_fmt->width = supported_modes[0].width;
        try_fmt->height = supported_modes[0].height;
-       try_fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+       try_fmt->code = MEDIA_BUS_FMT_SGBRG10_1X10;
        try_fmt->field = V4L2_FIELD_NONE;
 
        return 0;
@@ -827,7 +827,7 @@ static int imx258_enum_mbus_code(struct v4l2_subdev *sd,
        if (code->index > 0)
                return -EINVAL;
 
-       code->code = MEDIA_BUS_FMT_SGRBG10_1X10;
+       code->code = MEDIA_BUS_FMT_SGBRG10_1X10;
 
        return 0;
 }
@@ -839,7 +839,7 @@ static int imx258_enum_frame_size(struct v4l2_subdev *sd,
        if (fse->index >= ARRAY_SIZE(supported_modes))
                return -EINVAL;
 
-       if (fse->code != MEDIA_BUS_FMT_SGRBG10_1X10)
+       if (fse->code != MEDIA_BUS_FMT_SGBRG10_1X10)
                return -EINVAL;
 
        fse->min_width = supported_modes[fse->index].width;
@@ -855,7 +855,7 @@ static void imx258_update_pad_format(const struct 
imx258_mode *mode,
 {
        fmt->format.width = mode->width;
        fmt->format.height = mode->height;
-       fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
+       fmt->format.code = MEDIA_BUS_FMT_SGBRG10_1X10;
        fmt->format.field = V4L2_FIELD_NONE;
 }
 
@@ -902,7 +902,7 @@ static int imx258_set_pad_format(struct v4l2_subdev *sd,
        mutex_lock(&imx258->mutex);
 
        /* Only one raw bayer(GBRG) order is supported */
-       fmt->format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
+       fmt->format.code = MEDIA_BUS_FMT_SGBRG10_1X10;
 
        mode = v4l2_find_nearest_size(supported_modes,
                ARRAY_SIZE(supported_modes), width, height,
-- 
2.25.1

Reply via email to