J7200 has a single instance of 8 channel ADC in MCU domain. Add DT node for the same.
Signed-off-by: Vignesh Raghavendra <vigne...@ti.com> --- Resending, after rebasing and testing on top of 5.10-rc1. No code change. v1: https://lore.kernel.org/r/20201013081650.26090-1-vigne...@ti.com .../dts/ti/k3-j7200-common-proc-board.dts | 6 ++++++ .../boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 19 +++++++++++++++++++ 2 files changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts index ef03e7636b66..7d2ff1c3b50f 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts @@ -213,3 +213,9 @@ &usb0 { dr_mode = "otg"; maximum-speed = "high-speed"; }; + +&tscadc0 { + adc { + ti,adc-channels = <0 1 2 3 4 5 6 7>; + }; +}; diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi index eb2a78a53512..bb1fe9c12e44 100644 --- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi +++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi @@ -270,4 +270,23 @@ hbmc: hyperbus@47034000 { mux-controls = <&hbmc_mux 0>; }; }; + + tscadc0: tscadc@40200000 { + compatible = "ti,am3359-tscadc"; + reg = <0x00 0x40200000 0x00 0x1000>; + interrupts = <GIC_SPI 860 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&k3_pds 0 TI_SCI_PD_EXCLUSIVE>; + clocks = <&k3_clks 0 1>; + assigned-clocks = <&k3_clks 0 3>; + assigned-clock-rates = <60000000>; + clock-names = "adc_tsc_fck"; + dmas = <&main_udmap 0x7400>, + <&main_udmap 0x7401>; + dma-names = "fifo0", "fifo1"; + + adc { + #io-channel-cells = <1>; + compatible = "ti,am3359-adc"; + }; + }; }; -- 2.29.0
