On Fri, Sep 25, 2020 at 04:24:59PM +0300, Ioana Ciornei wrote:
> Annotate the EMDIO1 node and describe the 4 10GBASER PHYs found on the
> LS2088ARDB board. Also, add phy-handles for DPMACs 1-4 to their
> associated PHY.
>
> Signed-off-by: Ioana Ciornei <[email protected]>
> ---
> .../boot/dts/freescale/fsl-ls2088a-rdb.dts | 41 +++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
> index f6b4d75a258b..0d1935fcd201 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
> @@ -22,3 +22,44 @@ chosen {
> stdout-path = "serial1:115200n8";
> };
> };
> +
> +&dpmac1 {
> + phy-handle = <&mdio1_phy1>;
> +};
> +
> +&dpmac2 {
> + phy-handle = <&mdio1_phy2>;
> +};
> +
> +&dpmac3 {
> + phy-handle = <&mdio1_phy3>;
> +};
> +
> +&dpmac4 {
> + phy-handle = <&mdio1_phy4>;
> +};
> +
> +&emdio1 {
> + status = "okay";
> +
> + mdio1_phy1: emdio1_phy@1 {
> + compatible = "ethernet-phy-id13e5.1002";
> + reg = <0x10>;
> + phy-connection-type = "10gbase-r";
> + };
Please have a newline between nodes.
Shawn
> + mdio1_phy2: emdio1_phy@2 {
> + compatible = "ethernet-phy-id13e5.1002";
> + reg = <0x11>;
> + phy-connection-type = "10gbase-r";
> + };
> + mdio1_phy3: emdio1_phy@3 {
> + compatible = "ethernet-phy-id13e5.1002";
> + reg = <0x12>;
> + phy-connection-type = "10gbase-r";
> + };
> + mdio1_phy4: emdio1_phy@4 {
> + compatible = "ethernet-phy-id13e5.1002";
> + reg = <0x13>;
> + phy-connection-type = "10gbase-r";
> + };
> +};
> --
> 2.25.1
>
