On Fri, Oct 30, 2020 at 4:10 AM Jernej Skrabec <[email protected]> wrote: > > PineH64 model B contains RTL8723CS wifi+bt combo module. > > Since bluetooth support is not yet squared away, only wifi is enabled > for now. > > Signed-off-by: Jernej Skrabec <[email protected]> > --- > .../dts/allwinner/sun50i-h6-pine-h64-model-b.dts | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts > b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts > index f4c8966a6497..3f42b8b29b0f 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64-model-b.dts > @@ -10,6 +10,12 @@ / { > compatible = "pine64,pine-h64-model-b", "allwinner,sun50i-h6"; > > /delete-node/ reg_gmac_3v3; > + > + wifi_pwrseq: wifi_pwrseq { > + compatible = "mmc-pwrseq-simple"; > + reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */ > + post-power-on-delay-ms = <200>; > + }; > }; > > &hdmi_connector { > @@ -19,3 +25,11 @@ &hdmi_connector { > &emac { > phy-supply = <®_aldo2>; > }; > + > +&mmc1 { > + vmmc-supply = <®_cldo3>;
Please add vqmmc-supply, which according to the schematic is supplied by ALDO1. After that, Acked-by: Chen-Yu Tsai <[email protected]> > + mmc-pwrseq = <&wifi_pwrseq>; > + bus-width = <4>; > + non-removable; > + status = "okay"; > +}; > -- > 2.29.1 > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/linux-sunxi/20201029201537.598182-1-jernej.skrabec%40siol.net.
