This fixes a few things with the Pinecube AXP209 node: - No compatible is required since it is using an AXP209 (not AXP203) according to the schematics and this is what the included axp209.dtsi already has; - The interrupt-controller and #interrupt-cells properties are already described in the included axp209.dtsi; - The interrupt comes through the NMI controller, not directly through the GIC.
Signed-off-by: Paul Kocialkowski <[email protected]> --- arch/arm/boot/dts/sun8i-s3-pinecube.dts | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/sun8i-s3-pinecube.dts b/arch/arm/boot/dts/sun8i-s3-pinecube.dts index 9bab6b7f4014..ed6b4e94088d 100644 --- a/arch/arm/boot/dts/sun8i-s3-pinecube.dts +++ b/arch/arm/boot/dts/sun8i-s3-pinecube.dts @@ -88,13 +88,9 @@ &i2c0 { status = "okay"; axp209: pmic@34 { - compatible = "x-powers,axp203", - "x-powers,axp209"; reg = <0x34>; - interrupt-parent = <&gic>; - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; - interrupt-controller; - #interrupt-cells = <1>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; }; }; -- 2.28.0
