The new usb_control_msg_recv() and usb_control_msg_send() nicely wraps
usb_control_msg() with proper error check. Hence use the wrappers
instead of calling usb_control_msg() directly.
Signed-off-by: Himadri Pandya <himadrispan...@gmail.com>
---
drivers/usb/serial/io_edgeport.c | 73 ++++++++++++--------------------
1 file changed, 27 insertions(+), 46 deletions(-)
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index ba5d8df69518..8479d5684af7 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -568,34 +568,29 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
int result;
struct usb_serial *serial = ep->serial;
struct edgeport_product_info *product_info = &ep->product_info;
- struct edge_compatibility_descriptor *epic;
+ struct edge_compatibility_descriptor epic;
struct edge_compatibility_bits *bits;
struct device *dev = &serial->dev->dev;
ep->is_epic = 0;
- epic = kmalloc(sizeof(*epic), GFP_KERNEL);
- if (!epic)
- return -ENOMEM;
-
- result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- USB_REQUEST_ION_GET_EPIC_DESC,
- 0xC0, 0x00, 0x00,
- epic, sizeof(*epic),
- 300);
- if (result == sizeof(*epic)) {
+ result = usb_control_msg_recv(serial->dev, 0,
+ USB_REQUEST_ION_GET_EPIC_DESC, 0xC0,
+ 0x00, 0x00, &epic, sizeof(epic), 300,
+ GFP_KERNEL);
+ if (result) {
ep->is_epic = 1;
- memcpy(&ep->epic_descriptor, epic, sizeof(*epic));
+ memcpy(&ep->epic_descriptor, &epic, sizeof(epic));
memset(product_info, 0, sizeof(struct edgeport_product_info));
- product_info->NumPorts = epic->NumPorts;
+ product_info->NumPorts = epic.NumPorts;
product_info->ProdInfoVer = 0;
- product_info->FirmwareMajorVersion = epic->MajorVersion;
- product_info->FirmwareMinorVersion = epic->MinorVersion;
- product_info->FirmwareBuildNumber = epic->BuildNumber;
- product_info->iDownloadFile = epic->iDownloadFile;
- product_info->EpicVer = epic->EpicVer;
- product_info->Epic = epic->Supports;
+ product_info->FirmwareMajorVersion = epic.MajorVersion;
+ product_info->FirmwareMinorVersion = epic.MinorVersion;
+ product_info->FirmwareBuildNumber = epic.BuildNumber;
+ product_info->iDownloadFile = epic.iDownloadFile;
+ product_info->EpicVer = epic.EpicVer;
+ product_info->Epic = epic.Supports;
product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
dump_product_info(ep, product_info);
@@ -614,16 +609,12 @@ static int get_epic_descriptor(struct edgeport_serial *ep)
dev_dbg(dev, " IOSPWriteLCR : %s\n", bits->IOSPWriteLCR
? "TRUE": "FALSE");
dev_dbg(dev, " IOSPSetBaudRate : %s\n", bits->IOSPSetBaudRate
? "TRUE": "FALSE");
dev_dbg(dev, " TrueEdgeport : %s\n", bits->TrueEdgeport
? "TRUE": "FALSE");
-
- result = 0;
- } else if (result >= 0) {
+ } else {
dev_warn(&serial->interface->dev, "short epic descriptor
received: %d\n",
result);
result = -EIO;
}
- kfree(epic);
-
return result;
}
@@ -2168,11 +2159,6 @@ static int rom_read(struct usb_serial *serial, __u16
extAddr,
{
int result;
__u16 current_length;
- unsigned char *transfer_buffer;
-
- transfer_buffer = kmalloc(64, GFP_KERNEL);
- if (!transfer_buffer)
- return -ENOMEM;
/* need to split these reads up into 64 byte chunks */
result = 0;
@@ -2181,25 +2167,18 @@ static int rom_read(struct usb_serial *serial, __u16
extAddr,
current_length = 64;
else
current_length = length;
- result = usb_control_msg(serial->dev,
- usb_rcvctrlpipe(serial->dev, 0),
- USB_REQUEST_ION_READ_ROM,
- 0xC0, addr, extAddr, transfer_buffer,
- current_length, 300);
- if (result < current_length) {
- if (result >= 0)
- result = -EIO;
+ result = usb_control_msg_recv(serial->dev, 0,
+ USB_REQUEST_ION_READ_ROM, 0xC0,
+ addr, extAddr, data,
+ current_length, 300, GFP_KERNEL);
+ if (result)
break;
- }
- memcpy(data, transfer_buffer, current_length);
+
length -= current_length;
addr += current_length;
data += current_length;
- result = 0;
}
-
- kfree(transfer_buffer);
return result;
}
@@ -2801,10 +2780,12 @@ static void load_application_firmware(struct
edgeport_serial *edge_serial)
}
dev_dbg(dev, "sending exec_dl_code\n");
- response = usb_control_msg (edge_serial->serial->dev,
- usb_sndctrlpipe(edge_serial->serial->dev,
0),
- USB_REQUEST_ION_EXEC_DL_CODE,
- 0x40, 0x4000, 0x0001, NULL, 0, 3000);
+ response = usb_control_msg_send(edge_serial->serial->dev, 0,
+ USB_REQUEST_ION_EXEC_DL_CODE,
+ 0x40, 0x4000, 0x0001, NULL, 0, 3000,
+ GFP_KERNEL);
+ if (response)
+ dev_err(dev, "failed sending exec_dl_decode %d\n", response);
release_firmware(fw);
}
--
2.17.1
