Hi Huges On 11/4/20 6:32 PM, Hugues Fruchet wrote:
Add support of BT656 embedded synchronization bus. This mode allows to save hardware synchro lines hsync & vsync by replacing them with synchro codes embedded in data stream. Add "bus-type" property and make it required so that there is no ambiguity between parallel mode (bus-type=5) and BT656 mode (bus-type=6).=========== = history = =========== version 5: - Add revisited bindings and devicetree with explicit use of "bus-type" version 4: - Fix typo in commit message version 3: - Fix bus_width print to %u as per Sakari comment version 2: - As per Sakari remark, revisit commit message and document BT656 parallel bus mode in bindings version 1: - Initial submission Hugues Fruchet (4): media: stm32-dcmi: add support of BT656 bus media: dt-bindings: media: st,stm32-dcmi: add support of BT656 bus ARM: dts: stm32: set bus-type in DCMI endpoint for stm32mp157c-ev1 board ARM: dts: stm32: set bus-type in DCMI endpoint for stm32429i-eval board .../devicetree/bindings/media/st,stm32-dcmi.yaml | 38 ++++++++++++++++++++++ arch/arm/boot/dts/stm32429i-eval.dts | 1 + arch/arm/boot/dts/stm32mp157c-ev1.dts | 1 + drivers/media/platform/stm32/stm32-dcmi.c | 37 +++++++++++++++++++-- 4 files changed, 75 insertions(+), 2 deletions(-)
I'll take DT patches on stm32-next tree. regards alex
