On Fri, Oct 23, 2020 at 07:00:43PM -0700, Hemant Kumar wrote:
> It is possible that the device does not support the number of event
> rings and channels that the controller would like to use. Read the
> MHICFG to determine device-side support and if the controller requests
> more than the device supports, bailout without configuring device MMIO
> registers.
> 
> Signed-off-by: Hemant Kumar <[email protected]>
> ---
>  drivers/bus/mhi/core/init.c     | 31 +++++++++++++++++++++++++++++++
>  drivers/bus/mhi/core/internal.h |  4 ++++
>  2 files changed, 35 insertions(+)
> 
> diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
> index 70fd6af..35a6b1d 100644
> --- a/drivers/bus/mhi/core/init.c
> +++ b/drivers/bus/mhi/core/init.c
> @@ -488,6 +488,37 @@ int mhi_init_mmio(struct mhi_controller *mhi_cntrl)
>               { 0, 0, 0 }
>       };
>  
> +     /* range check b/w host and device supported ev rings and channels */
> +     ret = mhi_read_reg(mhi_cntrl, base, MHICFG, &val);
> +     if (ret) {
> +             dev_err(dev, "Unable to read MHICFG register\n");
> +             return -EIO;
> +     }
> +
> +     if (MHICFG_NHWER(val) < mhi_cntrl->hw_ev_rings) {
> +             dev_err(dev, "#HWEV ring: host requires %d dev supports %d\n",
> +                     mhi_cntrl->hw_ev_rings, MHICFG_NHWER(val));

Can you please improve this error message? Something like, "Host
requires %d hw event rings but dev supports only %d".

Do this for below errors as well. With that,

Reviewed-by: Manivannan Sadhasivam <[email protected]>

Thanks,
Mani

> +             return -EIO;
> +     }
> +
> +     if (MHICFG_NER(val) < mhi_cntrl->total_ev_rings) {
> +             dev_err(dev, "#EV ring: host requires %d dev supports %d\n",
> +                     mhi_cntrl->total_ev_rings, MHICFG_NER(val));
> +             return -EIO;
> +     }
> +
> +     if (MHICFG_NHWCH(val) < mhi_cntrl->hw_chan) {
> +             dev_err(dev, "#HWCH: host requires %d dev supports %d\n",
> +                     mhi_cntrl->hw_chan, MHICFG_NHWCH(val));
> +             return -EIO;
> +     }
> +
> +     if (MHICFG_NCH(val) < mhi_cntrl->max_chan) {
> +             dev_err(dev, "#CH: host requires %d dev supports %d\n",
> +                     mhi_cntrl->max_chan, MHICFG_NCH(val));
> +             return -EIO;
> +     }
> +
>       dev_dbg(dev, "Initializing MHI registers\n");
>  
>       /* Read channel db offset */
> diff --git a/drivers/bus/mhi/core/internal.h b/drivers/bus/mhi/core/internal.h
> index 3d8e480..9cbfa71 100644
> --- a/drivers/bus/mhi/core/internal.h
> +++ b/drivers/bus/mhi/core/internal.h
> @@ -28,6 +28,10 @@ extern struct bus_type mhi_bus_type;
>  #define MHICFG_NHWCH_SHIFT (8)
>  #define MHICFG_NCH_MASK (0xFF)
>  #define MHICFG_NCH_SHIFT (0)
> +#define MHICFG_NHWER(n) (((n) & MHICFG_NHWER_MASK) >> MHICFG_NHWER_SHIFT)
> +#define MHICFG_NER(n) (((n) & MHICFG_NER_MASK) >> MHICFG_NER_SHIFT)
> +#define MHICFG_NHWCH(n) (((n) & MHICFG_NHWCH_MASK) >> MHICFG_NHWCH_SHIFT)
> +#define MHICFG_NCH(n) (((n) & MHICFG_NCH_MASK) >> MHICFG_NCH_SHIFT)
>  
>  #define CHDBOFF (0x18)
>  #define CHDBOFF_CHDBOFF_MASK (0xFFFFFFFF)
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
> 

Reply via email to