Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <[email protected]>
---
Changes since v2:
- new patch
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 162 +++++++++++++-----
1 file changed, 116 insertions(+), 46 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 2f60a6ba7e14..055da2c710c3 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -8,6 +8,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -32,7 +33,7 @@
compatible = "arm,cortex-a72";
reg = <0x0>;
enable-method = "psci";
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -43,7 +44,7 @@
compatible = "arm,cortex-a72";
reg = <0x1>;
enable-method = "psci";
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -236,7 +237,8 @@
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -246,7 +248,8 @@
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -256,7 +259,8 @@
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -266,7 +270,8 @@
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -276,7 +281,8 @@
#size-cells = <0>;
reg = <0x0 0x2040000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -286,7 +292,8 @@
#size-cells = <0>;
reg = <0x0 0x2050000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -296,7 +303,8 @@
#size-cells = <0>;
reg = <0x0 0x2060000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -306,7 +314,8 @@
#size-cells = <0>;
reg = <0x0 0x2070000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -318,7 +327,8 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 2 0>, <&clockgen 2 0>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 0>,
+ <&clockgen QORIQ_CLK_HWACCEL 0>;
clock-names = "fspi_en", "fspi";
status = "disabled";
};
@@ -330,7 +340,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 62>, <&edma0 0 60>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
@@ -345,7 +356,8 @@
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 58>, <&edma0 0 56>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
@@ -360,7 +372,8 @@
reg = <0x0 0x2120000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 54>, <&edma0 0 2>;
dma-names = "tx", "rx";
spi-num-chipselects = <3>;
@@ -373,7 +386,7 @@
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@@ -386,7 +399,7 @@
reg = <0x0 0x2150000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
broken-cd;
@@ -399,7 +412,8 @@
compatible = "fsl,ls1028ar1-flexcan",
"fsl,lx2160ar1-flexcan";
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sysclk>, <&clockgen 4 1>;
+ clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -408,7 +422,8 @@
compatible = "fsl,ls1028ar1-flexcan",
"fsl,lx2160ar1-flexcan";
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sysclk>, <&clockgen 4 1>;
+ clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -417,7 +432,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -425,7 +441,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -434,7 +451,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2260000 0x0 0x1000>;
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 32>,
@@ -446,7 +464,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2270000 0x0 0x1000>;
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 30>,
@@ -458,7 +477,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2280000 0x0 0x1000>;
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 28>,
@@ -470,7 +490,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2290000 0x0 0x1000>;
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 26>,
@@ -482,7 +503,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x22a0000 0x0 0x1000>;
interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 24>,
@@ -494,7 +516,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x22b0000 0x0 0x1000>;
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 22>,
@@ -513,8 +536,10 @@
interrupt-names = "edma-tx", "edma-err";
dma-channels = <32>;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 1>,
- <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
gpio1: gpio@2300000 {
@@ -576,7 +601,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -748,14 +774,20 @@
cluster1_core0_watchdog: watchdog@c000000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: watchdog@c010000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
@@ -764,8 +796,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf100000 0x0 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 4>,
@@ -779,8 +817,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf110000 0x0 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 6>,
@@ -794,8 +838,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf120000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 8>,
@@ -809,8 +859,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf130000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 10>,
@@ -824,8 +880,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf140000 0x0 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 12>,
@@ -839,8 +901,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf150000 0x0 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 14>,
@@ -961,7 +1029,7 @@
ethernet@0,4 {
compatible = "fsl,enetc-ptp";
reg = <0x000400 0 0 0 0>;
- clocks = <&clockgen 2 3>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
little-endian;
fsl,extts-fifo;
};
@@ -1056,8 +1124,10 @@
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "DE", "SE";
- clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
- <&clockgen 2 2>;
+ clocks = <&dpclk>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>;
clock-names = "pxlclk", "mclk", "aclk", "pclk";
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
arm,malidp-arqos-value = <0xd000d000>;
--
2.20.1
