This patch introduces an alternative way of obtaining resources - via
ACPI tables provided by firmware. In addition to the of_* -> device_*
API replacement, sdhci_xenon_acpi_match table was introduced.
Also, the entire supply clocks configuration had to be skipped,
because in case of ACPI it is firmware responsibility to enable them.

Signed-off-by: Marcin Wojtas <[email protected]>
---
Hi,

In case anyone would like to test the patch, I share the EDK2
firmware for MacchiatoBin board, which has relevant ACPI
description https://drive.google.com/file/d/1ygdHGl30ww9LAqZAQlTsz2nnhN3Od9GG

Looking forward to your feedback.

Best regards,
Marcin

 drivers/mmc/host/sdhci-xenon.h     |   4 +-
 drivers/mmc/host/sdhci-xenon-phy.c |  36 ++++---
 drivers/mmc/host/sdhci-xenon.c     | 109 +++++++++++++-------
 3 files changed, 91 insertions(+), 58 deletions(-)

diff --git a/drivers/mmc/host/sdhci-xenon.h b/drivers/mmc/host/sdhci-xenon.h
index 593b82d7b68a..542b6ad35ff3 100644
--- a/drivers/mmc/host/sdhci-xenon.h
+++ b/drivers/mmc/host/sdhci-xenon.h
@@ -93,8 +93,8 @@ struct xenon_priv {
 };
 
 int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios *ios);
-int xenon_phy_parse_dt(struct device_node *np,
-                      struct sdhci_host *host);
+int xenon_phy_parse_params(struct device *dev,
+                          struct sdhci_host *host);
 void xenon_soc_pad_ctrl(struct sdhci_host *host,
                        unsigned char signal_voltage);
 #endif
diff --git a/drivers/mmc/host/sdhci-xenon-phy.c 
b/drivers/mmc/host/sdhci-xenon-phy.c
index 03ce57ef4585..a6df95ec31c5 100644
--- a/drivers/mmc/host/sdhci-xenon-phy.c
+++ b/drivers/mmc/host/sdhci-xenon-phy.c
@@ -689,35 +689,37 @@ static int get_dt_pad_ctrl_data(struct sdhci_host *host,
        return ret;
 }
 
-static int xenon_emmc_phy_parse_param_dt(struct sdhci_host *host,
-                                        struct device_node *np,
-                                        struct xenon_emmc_phy_params *params)
+static int xenon_emmc_phy_parse_params(struct sdhci_host *host,
+                                      struct device *dev,
+                                      struct xenon_emmc_phy_params *params)
 {
        u32 value;
 
        params->slow_mode = false;
-       if (of_property_read_bool(np, "marvell,xenon-phy-slow-mode"))
+       if (device_property_read_bool(dev, "marvell,xenon-phy-slow-mode"))
                params->slow_mode = true;
 
        params->znr = XENON_ZNR_DEF_VALUE;
-       if (!of_property_read_u32(np, "marvell,xenon-phy-znr", &value))
+       if (!device_property_read_u32(dev, "marvell,xenon-phy-znr", &value))
                params->znr = value & XENON_ZNR_MASK;
 
        params->zpr = XENON_ZPR_DEF_VALUE;
-       if (!of_property_read_u32(np, "marvell,xenon-phy-zpr", &value))
+       if (!device_property_read_u32(dev, "marvell,xenon-phy-zpr", &value))
                params->zpr = value & XENON_ZPR_MASK;
 
        params->nr_tun_times = XENON_TUN_CONSECUTIVE_TIMES;
-       if (!of_property_read_u32(np, "marvell,xenon-phy-nr-success-tun",
-                                 &value))
+       if (!device_property_read_u32(dev, "marvell,xenon-phy-nr-success-tun",
+                                     &value))
                params->nr_tun_times = value & XENON_TUN_CONSECUTIVE_TIMES_MASK;
 
        params->tun_step_divider = XENON_TUNING_STEP_DIVIDER;
-       if (!of_property_read_u32(np, "marvell,xenon-phy-tun-step-divider",
-                                 &value))
+       if (!device_property_read_u32(dev, "marvell,xenon-phy-tun-step-divider",
+                                     &value))
                params->tun_step_divider = value & 0xFF;
 
-       return get_dt_pad_ctrl_data(host, np, params);
+       if (dev->of_node)
+               return get_dt_pad_ctrl_data(host, dev->of_node, params);
+       return 0;
 }
 
 /* Set SoC PHY Voltage PAD */
@@ -811,7 +813,7 @@ int xenon_phy_adj(struct sdhci_host *host, struct mmc_ios 
*ios)
        return ret;
 }
 
-static int xenon_add_phy(struct device_node *np, struct sdhci_host *host,
+static int xenon_add_phy(struct device *dev, struct sdhci_host *host,
                         const char *phy_name)
 {
        struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -830,15 +832,15 @@ static int xenon_add_phy(struct device_node *np, struct 
sdhci_host *host,
        if (ret)
                return ret;
 
-       return xenon_emmc_phy_parse_param_dt(host, np, priv->phy_params);
+       return xenon_emmc_phy_parse_params(host, dev, priv->phy_params);
 }
 
-int xenon_phy_parse_dt(struct device_node *np, struct sdhci_host *host)
+int xenon_phy_parse_params(struct device *dev, struct sdhci_host *host)
 {
        const char *phy_type = NULL;
 
-       if (!of_property_read_string(np, "marvell,xenon-phy-type", &phy_type))
-               return xenon_add_phy(np, host, phy_type);
+       if (!device_property_read_string(dev, "marvell,xenon-phy-type", 
&phy_type))
+               return xenon_add_phy(dev, host, phy_type);
 
-       return xenon_add_phy(np, host, "emmc 5.1 phy");
+       return xenon_add_phy(dev, host, "emmc 5.1 phy");
 }
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 24c978de2a3f..f2990e474e58 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -11,6 +11,7 @@
  * Special thanks to Video BG4 project team.
  */
 
+#include <linux/acpi.h>
 #include <linux/delay.h>
 #include <linux/ktime.h>
 #include <linux/module.h>
@@ -247,6 +248,16 @@ static void xenon_voltage_switch(struct sdhci_host *host)
        sdhci_readw(host, SDHCI_HOST_CONTROL2);
 }
 
+static unsigned int xenon_get_max_clock(struct sdhci_host *host)
+{
+       struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+
+       if (pltfm_host->clk)
+               return sdhci_pltfm_clk_get_max_clock(host);
+       else
+               return pltfm_host->clock;
+}
+
 static const struct sdhci_ops sdhci_xenon_ops = {
        .voltage_switch         = xenon_voltage_switch,
        .set_clock              = sdhci_set_clock,
@@ -254,7 +265,7 @@ static const struct sdhci_ops sdhci_xenon_ops = {
        .set_bus_width          = sdhci_set_bus_width,
        .reset                  = xenon_reset,
        .set_uhs_signaling      = xenon_set_uhs_signaling,
-       .get_max_clock          = sdhci_pltfm_clk_get_max_clock,
+       .get_max_clock          = xenon_get_max_clock,
 };
 
 static const struct sdhci_pltfm_data sdhci_xenon_pdata = {
@@ -407,9 +418,9 @@ static void xenon_replace_mmc_host_ops(struct sdhci_host 
*host)
  *         Refer to XENON_SYS_CFG_INFO register
  * tun-count: the interval between re-tuning
  */
-static int xenon_probe_dt(struct platform_device *pdev)
+static int xenon_probe_params(struct platform_device *pdev)
 {
-       struct device_node *np = pdev->dev.of_node;
+       struct device *dev = &pdev->dev;
        struct sdhci_host *host = platform_get_drvdata(pdev);
        struct mmc_host *mmc = host->mmc;
        struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
@@ -418,11 +429,12 @@ static int xenon_probe_dt(struct platform_device *pdev)
        u32 tuning_count;
 
        /* Disable HS200 on Armada AP806 */
-       if (of_device_is_compatible(np, "marvell,armada-ap806-sdhci"))
+       if (device_property_match_string(dev, "compatible",
+                                        "marvell,armada-ap806-sdhci") >= 0)
                host->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
 
        sdhc_id = 0x0;
-       if (!of_property_read_u32(np, "marvell,xenon-sdhc-id", &sdhc_id)) {
+       if (!device_property_read_u32(dev, "marvell,xenon-sdhc-id", &sdhc_id)) {
                nr_sdhc = sdhci_readl(host, XENON_SYS_CFG_INFO);
                nr_sdhc &= XENON_NR_SUPPORTED_SLOT_MASK;
                if (unlikely(sdhc_id > nr_sdhc)) {
@@ -434,8 +446,8 @@ static int xenon_probe_dt(struct platform_device *pdev)
        priv->sdhc_id = sdhc_id;
 
        tuning_count = XENON_DEF_TUNING_COUNT;
-       if (!of_property_read_u32(np, "marvell,xenon-tun-count",
-                                 &tuning_count)) {
+       if (!device_property_read_u32(dev, "marvell,xenon-tun-count",
+                                     &tuning_count)) {
                if (unlikely(tuning_count >= XENON_TMR_RETUN_NO_PRESENT)) {
                        dev_err(mmc_dev(mmc), "Wrong Re-tuning Count. Set 
default value %d\n",
                                XENON_DEF_TUNING_COUNT);
@@ -444,7 +456,7 @@ static int xenon_probe_dt(struct platform_device *pdev)
        }
        priv->tuning_count = tuning_count;
 
-       return xenon_phy_parse_dt(np, host);
+       return xenon_phy_parse_params(dev, host);
 }
 
 static int xenon_sdhc_prepare(struct sdhci_host *host)
@@ -483,6 +495,7 @@ static void xenon_sdhc_unprepare(struct sdhci_host *host)
 static int xenon_probe(struct platform_device *pdev)
 {
        struct sdhci_pltfm_host *pltfm_host;
+       struct device *dev = &pdev->dev;
        struct sdhci_host *host;
        struct xenon_priv *priv;
        int err;
@@ -501,37 +514,39 @@ static int xenon_probe(struct platform_device *pdev)
         */
        xenon_replace_mmc_host_ops(host);
 
-       pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
-       if (IS_ERR(pltfm_host->clk)) {
-               err = PTR_ERR(pltfm_host->clk);
-               dev_err(&pdev->dev, "Failed to setup input clk: %d\n", err);
-               goto free_pltfm;
-       }
-       err = clk_prepare_enable(pltfm_host->clk);
-       if (err)
-               goto free_pltfm;
-
-       priv->axi_clk = devm_clk_get(&pdev->dev, "axi");
-       if (IS_ERR(priv->axi_clk)) {
-               err = PTR_ERR(priv->axi_clk);
-               if (err == -EPROBE_DEFER)
-                       goto err_clk;
-       } else {
-               err = clk_prepare_enable(priv->axi_clk);
+       if (dev->of_node) {
+               pltfm_host->clk = devm_clk_get(&pdev->dev, "core");
+               if (IS_ERR(pltfm_host->clk)) {
+                       err = PTR_ERR(pltfm_host->clk);
+                       dev_err(&pdev->dev, "Failed to setup input clk: %d\n", 
err);
+                       goto free_pltfm;
+               }
+               err = clk_prepare_enable(pltfm_host->clk);
                if (err)
-                       goto err_clk;
+                       goto free_pltfm;
+
+               priv->axi_clk = devm_clk_get(&pdev->dev, "axi");
+               if (IS_ERR(priv->axi_clk)) {
+                       err = PTR_ERR(priv->axi_clk);
+                       if (err == -EPROBE_DEFER)
+                               goto err_clk;
+               } else {
+                       err = clk_prepare_enable(priv->axi_clk);
+                       if (err)
+                               goto err_clk;
+               }
        }
 
        err = mmc_of_parse(host->mmc);
        if (err)
                goto err_clk_axi;
 
-       sdhci_get_of_property(pdev);
+       sdhci_get_property(pdev);
 
        xenon_set_acg(host, false);
 
-       /* Xenon specific dt parse */
-       err = xenon_probe_dt(pdev);
+       /* Xenon specific parameters parse */
+       err = xenon_probe_params(pdev);
        if (err)
                goto err_clk_axi;
 
@@ -559,9 +574,11 @@ static int xenon_probe(struct platform_device *pdev)
        pm_runtime_put_noidle(&pdev->dev);
        xenon_sdhc_unprepare(host);
 err_clk_axi:
-       clk_disable_unprepare(priv->axi_clk);
+       if (dev->of_node)
+               clk_disable_unprepare(priv->axi_clk);
 err_clk:
-       clk_disable_unprepare(pltfm_host->clk);
+       if (dev->of_node)
+               clk_disable_unprepare(pltfm_host->clk);
 free_pltfm:
        sdhci_pltfm_free(pdev);
        return err;
@@ -572,6 +589,7 @@ static int xenon_remove(struct platform_device *pdev)
        struct sdhci_host *host = platform_get_drvdata(pdev);
        struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
        struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
+       struct device *dev = &pdev->dev;
 
        pm_runtime_get_sync(&pdev->dev);
        pm_runtime_disable(&pdev->dev);
@@ -580,8 +598,10 @@ static int xenon_remove(struct platform_device *pdev)
        sdhci_remove_host(host, 0);
 
        xenon_sdhc_unprepare(host);
-       clk_disable_unprepare(priv->axi_clk);
-       clk_disable_unprepare(pltfm_host->clk);
+       if (dev->of_node) {
+               clk_disable_unprepare(priv->axi_clk);
+               clk_disable_unprepare(pltfm_host->clk);
+       }
 
        sdhci_pltfm_free(pdev);
 
@@ -618,7 +638,8 @@ static int xenon_runtime_suspend(struct device *dev)
        if (host->tuning_mode != SDHCI_TUNING_MODE_3)
                mmc_retune_needed(host->mmc);
 
-       clk_disable_unprepare(pltfm_host->clk);
+       if (dev->of_node)
+               clk_disable_unprepare(pltfm_host->clk);
        /*
         * Need to update the priv->clock here, or when runtime resume
         * back, phy don't aware the clock change and won't adjust phy
@@ -635,10 +656,12 @@ static int xenon_runtime_resume(struct device *dev)
        struct xenon_priv *priv = sdhci_pltfm_priv(pltfm_host);
        int ret;
 
-       ret = clk_prepare_enable(pltfm_host->clk);
-       if (ret) {
-               dev_err(dev, "can't enable mainck\n");
-               return ret;
+       if (dev->of_node) {
+               ret = clk_prepare_enable(pltfm_host->clk);
+               if (ret) {
+                       dev_err(dev, "can't enable mainck\n");
+                       return ret;
+               }
        }
 
        if (priv->restore_needed) {
@@ -653,7 +676,8 @@ static int xenon_runtime_resume(struct device *dev)
                goto out;
        return 0;
 out:
-       clk_disable_unprepare(pltfm_host->clk);
+       if (dev->of_node)
+               clk_disable_unprepare(pltfm_host->clk);
        return ret;
 }
 #endif /* CONFIG_PM */
@@ -674,11 +698,18 @@ static const struct of_device_id sdhci_xenon_dt_ids[] = {
 };
 MODULE_DEVICE_TABLE(of, sdhci_xenon_dt_ids);
 
+static const struct acpi_device_id sdhci_xenon_acpi_ids[] = {
+       { .id = "MRVL0002",},
+       {}
+};
+MODULE_DEVICE_TABLE(acpi, sdhci_xenon_acpi_ids);
+
 static struct platform_driver sdhci_xenon_driver = {
        .driver = {
                .name   = "xenon-sdhci",
                .probe_type = PROBE_PREFER_ASYNCHRONOUS,
                .of_match_table = sdhci_xenon_dt_ids,
+               .acpi_match_table = ACPI_PTR(sdhci_xenon_acpi_ids),
                .pm = &sdhci_xenon_dev_pm_ops,
        },
        .probe  = xenon_probe,
-- 
2.29.0

Reply via email to