This should be done in the device driver instead of the device tree.
Signed-off-by: Christian Eggers <[email protected]>
---
drivers/net/dsa/microchip/ksz8795_spi.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/dsa/microchip/ksz8795_spi.c
b/drivers/net/dsa/microchip/ksz8795_spi.c
index 8b00f8e6c02f..f98432a3e2b5 100644
--- a/drivers/net/dsa/microchip/ksz8795_spi.c
+++ b/drivers/net/dsa/microchip/ksz8795_spi.c
@@ -49,6 +49,12 @@ static int ksz8795_spi_probe(struct spi_device *spi)
if (spi->dev.platform_data)
dev->pdata = spi->dev.platform_data;
+ /* setup spi */
+ spi->mode = SPI_MODE_3;
+ ret = spi_setup(spi);
+ if (ret)
+ return ret;
+
ret = ksz8795_switch_register(dev);
/* Main DSA driver may not be started yet. */
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer:
HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer:
HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger;
Markus Zeiler
