[PATCH 2/2] arm64: dts: meson-axg: add MIPI DSI PHY nodes

[Neil Armstrong]

This adds the nodes for :
- MIPI DSI+PCIe analog phy
- MIPI D-PHY

Signed-off-by: Neil Armstrong <narmstr...@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi 
b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 288667699ec0..d811708f8f67 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1159,6 +1159,12 @@ pwrc: power-controller {
                                                               <250000000>,
                                                               <0>; /* Do 
Nothing */
                                };
+
+                               mipi_pcie_analog_dphy: phy {
+                                       compatible = 
"amlogic,axg-mipi-pcie-analog-phy";
+                                       #phy-cells = <0>;
+                                       status = "disabled";
+                               };
                        };
                };
 
@@ -1171,6 +1177,19 @@ mailbox: mailbox@ff63c404 {
                        #mbox-cells = <1>;
                };
 
+               mipi_dphy: phy@ff640000 {
+                       compatible = "amlogic,axg-mipi-dphy";
+                       reg = <0x0 0xff640000 0x0 0x100>;
+                       clocks = <&clkc CLKID_MIPI_DSI_PHY>;
+                       clock-names = "pclk";
+                       resets = <&reset RESET_MIPI_PHY>;
+                       reset-names = "phy";
+                       phys = <&mipi_pcie_analog_dphy>;
+                       phy-names = "analog";
+                       #phy-cells = <0>;
+                       status = "disabled";
+               };
+
                audio: bus@ff642000 {
                        compatible = "simple-bus";
                        reg = <0x0 0xff642000 0x0 0x2000>;
-- 
2.25.1