Timur Tabi wrote:
> And this is a problem that has plagues all PC operating systems, but has never
> been a problem on the Macintosh. Why? Because the Mac was designed to handle
> this problem, but the PC never was.
>
> The Mac never enumerates its devices like the PC does (no C: D: etc, no
> /dev/sda, /dev/sdb, or anything like that). It also remembers the boot device
> in its EEPROM (the Startup Disk Control Panel handles this).
Are you sure about that? According to my documentation on installing linux on a G4
with scsi disks, you need to specify a device enumeration string like the following
to tell the system where to look for the boot device:
/pci@f2000000/pci-bridge@d/ATTO,ExpressPCIProUL2D@4,1/@6:5
where the '6' is the SCSI ID of the drive, and the '5' is the partition number of the
boot partition. So if you change SCSI IDs or add a new partition and change the
partition numbering of the drive, your computer can't boot anymore.
Chris
--
Chris Friesen | MailStop: 043/33/F10
Nortel Networks | work: (613) 765-0557
3500 Carling Avenue | fax: (613) 765-2986
Nepean, ON K2H 8E9 Canada | email: [EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
