From: Sean Nyekjaer <[email protected]> commit 365ec8b61689bd64d6a61e129e0319bf71336407 upstream.
Limit the fsl,pfuze-support-disable-sw to the pfuze100 and pfuze200 variants. When enabling fsl,pfuze-support-disable-sw and using a pfuze3000 or pfuze3001, the driver would choose pfuze100_sw_disable_regulator_ops instead of the newly introduced and correct pfuze3000_sw_regulator_ops. Signed-off-by: Sean Nyekjaer <[email protected]> Fixes: 6f1cf5257acc ("regualtor: pfuze100: correct sw1a/sw2 on pfuze3000") Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]> --- drivers/regulator/pfuze100-regulator.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -833,11 +833,14 @@ static int pfuze100_regulator_probe(stru * the switched regulator till yet. */ if (pfuze_chip->flags & PFUZE_FLAG_DISABLE_SW) { - if (pfuze_chip->regulator_descs[i].sw_reg) { - desc->ops = &pfuze100_sw_disable_regulator_ops; - desc->enable_val = 0x8; - desc->disable_val = 0x0; - desc->enable_time = 500; + if (pfuze_chip->chip_id == PFUZE100 || + pfuze_chip->chip_id == PFUZE200) { + if (pfuze_chip->regulator_descs[i].sw_reg) { + desc->ops = &pfuze100_sw_disable_regulator_ops; + desc->enable_val = 0x8; + desc->disable_val = 0x0; + desc->enable_time = 500; + } } }
