Losing arbitration is normal in a CAN-bus network, it means that a
higher priority frame is being send and the pending message will be
retried later. Hence most driver only increment arbitration_lost, but
the sja1000 and sun4i driver also incremeant tx_error, causing errors
to be reported on a normal functioning CAN-bus. So stop counting them
as errors.
For completeness, the Kvaser USB hybra also increments the tx_error
on arbitration lose, but it does so in single shot. Since in that
case the message is not retried, that behaviour is kept.
Signed-off-by: Jeroen Hofstee <jhofs...@victronenergy.com>
---
drivers/net/can/sja1000/sja1000.c | 1 -
drivers/net/can/sun4i_can.c | 1 -
2 files changed, 2 deletions(-)
diff --git a/drivers/net/can/sja1000/sja1000.c
b/drivers/net/can/sja1000/sja1000.c
index 9f107798f904..25a4d7d0b349 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -474,7 +474,6 @@ static int sja1000_err(struct net_device *dev, uint8_t
isrc, uint8_t status)
netdev_dbg(dev, "arbitration lost interrupt\n");
alc = priv->read_reg(priv, SJA1000_ALC);
priv->can.can_stats.arbitration_lost++;
- stats->tx_errors++;
cf->can_id |= CAN_ERR_LOSTARB;
cf->data[0] = alc & 0x1f;
}
diff --git a/drivers/net/can/sun4i_can.c b/drivers/net/can/sun4i_can.c
index e2c6cf4b2228..b3f2f4fe5ee0 100644
--- a/drivers/net/can/sun4i_can.c
+++ b/drivers/net/can/sun4i_can.c
@@ -604,7 +604,6 @@ static int sun4i_can_err(struct net_device *dev, u8 isrc,
u8 status)
netdev_dbg(dev, "arbitration lost interrupt\n");
alc = readl(priv->base + SUN4I_REG_STA_ADDR);
priv->can.can_stats.arbitration_lost++;
- stats->tx_errors++;
if (likely(skb)) {
cf->can_id |= CAN_ERR_LOSTARB;
cf->data[0] = (alc >> 8) & 0x1f;
--
2.17.1
