On 28/11/2020 上午12:10, Guenter Roeck wrote:
On Fri, Nov 27, 2020 at 09:59:01AM +0800, Charles wrote:
Add the pmbus driver for the STMicroelectronics pm6764 voltage regulator.
the output voltage use the MFR_READ_VOUT 0xD4
vout value returned is linear11
Signed-off-by: Charles Hsu <hsu.yungt...@gmail.com>
This patch (again) didn't make it to any of the mailing lists.
Please try to find out why this is the case. I usually pick up
patches from https://patchwork.kernel.org/project/linux-hwmon/list/,
and may easily miss a patch if I can't find it there.
---
v5:
- Add MAINTAINERS
- Add a reference into trivial-devices.yaml
v4:
- Add pm6764tr to Documentation/hwmon/index.rst.
v3:
- Add Documentation(Documentation/hwmon/pm6764tr.rst).
- Fix include order.
v2:
- Fix formatting.
- Remove pmbus_do_remove.
- Change from .probe to .probe_new.
v1:
- Initial patchset.
---
.../devicetree/bindings/trivial-devices.yaml | 2 +
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/pm6764tr.rst | 33 ++++++++
MAINTAINERS | 7 ++
drivers/hwmon/pmbus/Kconfig | 9 +++
drivers/hwmon/pmbus/Makefile | 1 +
drivers/hwmon/pmbus/pm6764tr.c | 76 +++++++++++++++++++
7 files changed, 129 insertions(+)
create mode 100644 Documentation/hwmon/pm6764tr.rst
create mode 100644 drivers/hwmon/pmbus/pm6764tr.c
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml
b/Documentation/devicetree/bindings/trivial-devices.yaml
index ab623ba930d5..cdd7bdb6abbb 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -348,6 +348,8 @@ properties:
- socionext,synquacer-tpm-mmio
# i2c serial eeprom (24cxx)
- st,24c256
+ # SMBus/I2C Voltage Regulator
+ - st,pm6764tr
# Ambient Light Sensor with SMBUS/Two Wire Serial Interface
- taos,tsl2550
# 8-Channels, 12-bit ADC
This, like all devicetre changes, needs to be a separate patch.
Also, please make sure to copy dt maintainers and the dt mailing list
when you send that patch.
Thank you for your suggestions.
I will send that patch as soon as possible.
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index b797db738225..1bbd05e41de4 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -144,6 +144,7 @@ Hardware Monitoring Kernel Drivers
pc87360
pc87427
pcf8591
+ pm6764tr
pmbus
powr1220
pxe1610
diff --git a/Documentation/hwmon/pm6764tr.rst b/Documentation/hwmon/pm6764tr.rst
new file mode 100644
index 000000000000..5e8092e39297
--- /dev/null
+++ b/Documentation/hwmon/pm6764tr.rst
@@ -0,0 +1,33 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+Kernel driver pm6764tr
+======================
+
+Supported chips:
+
+ * ST PM6764TR
+
+ Prefix: 'pm6764tr'
+
+ Addresses scanned: -
+
+ Datasheet: http://www.st.com/resource/en/data_brief/pm6764.pdf
+
+Authors:
+ <hsu.yungt...@gmail.com>
+
+Description:
+------------
+
+This driver supports the STMicroelectronics PM6764TR chip. The PM6764TR is a
high
+performance digital controller designed to power Intel’s VR12.5 processors and
memories.
+
Unrelated side note: I understand this means that you are forced to keep the
datasheet under wraps, which in turn means I can not suggest functionality
improvements since I don't have access to it. If the chip happens to support
per-rail telemetry, you might want to consider adding support for that in a
follow-up patch.
+The device utilizes digital technology to implement all control and power
management
+functions to provide maximum flexibility and performance. The NVM is embedded
to store
+custom configurations. The PM6764TR device features up to 4-phase programmable
operation.
+
+The PM6764TR supports power state transitions featuring VFDE, and programmable
DPM
+maintaining the best efficiency over all loading conditions without
compromising transient
+response. The device assures fast and independent protectionagainstload
overcurrent,
"protectionagainstload" -> "protection against load"
+under/overvoltage and feedback disconnections.
+
Drop empty line at end.
diff --git a/MAINTAINERS b/MAINTAINERS
index 94ac10a153c7..a3fea132c4ed 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13904,6 +13904,13 @@ M: Logan Gunthorpe <log...@deltatee.com>
S: Maintained
F: drivers/dma/plx_dma.c
Add empty line.
There is an empty line here,
Should I add one more empty line?
+PM6764TR DRIVER
+M: Charles Hsu <hsu.yungt...@gmail.com>
+L: linux-hw...@vger.kernel.org
+S: Maintained
+F: Documentation/hwmon/pm6764tr.rst
+F: drivers/hwmon/pmbus/pm6764tr.c
+
PM-GRAPH UTILITY
M: "Todd E Brandt" <todd.e.bra...@linux.intel.com>
L: linux...@vger.kernel.org
diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig
index a25faf69fce3..9c846facce9f 100644
--- a/drivers/hwmon/pmbus/Kconfig
+++ b/drivers/hwmon/pmbus/Kconfig
@@ -220,6 +220,15 @@ config SENSORS_MP2975
This driver can also be built as a module. If so, the module will
be called mp2975.
Add empty line.
Same as above.
+config SENSORS_PM6764TR
+ tristate "ST PM6764TR"
+ help
+ If you say yes here you get hardware monitoring support for ST
+ PM6764TR.
+
+ This driver can also be built as a module. If so, the module will
+ be called pm6764tr.
+
config SENSORS_PXE1610
tristate "Infineon PXE1610"
help
diff --git a/drivers/hwmon/pmbus/Makefile b/drivers/hwmon/pmbus/Makefile
index 4c97ad0bd791..31ebdef5d4a6 100644
--- a/drivers/hwmon/pmbus/Makefile
+++ b/drivers/hwmon/pmbus/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_SENSORS_MAX31785) += max31785.o
obj-$(CONFIG_SENSORS_MAX34440) += max34440.o
obj-$(CONFIG_SENSORS_MAX8688) += max8688.o
obj-$(CONFIG_SENSORS_MP2975) += mp2975.o
+obj-$(CONFIG_SENSORS_PM6764TR) += pm6764tr.o
obj-$(CONFIG_SENSORS_PXE1610) += pxe1610.o
obj-$(CONFIG_SENSORS_TPS40422) += tps40422.o
obj-$(CONFIG_SENSORS_TPS53679) += tps53679.o
diff --git a/drivers/hwmon/pmbus/pm6764tr.c b/drivers/hwmon/pmbus/pm6764tr.c
new file mode 100644
index 000000000000..70747c21c66e
--- /dev/null
+++ b/drivers/hwmon/pmbus/pm6764tr.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Hardware monitoring driver for STMicroelectronics digital controller
PM6764TR
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pmbus.h>
+#include "pmbus.h"
+
+#define PM6764TR_PMBUS_READ_VOUT 0xD4
+
+static int pm6764tr_read_word_data(struct i2c_client *client, int page, int
reg)
+{
+ int ret;
+
+ switch (reg) {
+ case PMBUS_VIRT_READ_VMON:
+ ret = pmbus_read_word_data(client, page,
PM6764TR_PMBUS_READ_VOUT);
+ break;
+ default:
+ ret = -ENODATA;
+ break;
+ }
+ return ret;
+}
+
+static struct pmbus_driver_info pm6764tr_info = {
+ .pages = 1,
+ .format[PSC_VOLTAGE_IN] = linear,
+ .format[PSC_VOLTAGE_OUT] = vid,
+ .format[PSC_TEMPERATURE] = linear,
+ .format[PSC_CURRENT_OUT] = linear,
+ .format[PSC_POWER] = linear,
+ .func[0] = PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN |
+ PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | PMBUS_HAVE_VMON |
+ PMBUS_HAVE_STATUS_IOUT | PMBUS_HAVE_STATUS_VOUT |
+ PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP,
+ .read_word_data = pm6764tr_read_word_data,
+};
+
+static int pm6764tr_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ return pmbus_do_probe(client, id, &pm6764tr_info);
+}
+
+static const struct i2c_device_id pm6764tr_id[] = {
+ {"pm6764tr", 0},
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, pm6764tr_id);
+
+static const struct of_device_id pm6764tr_of_match[] = {
+ {.compatible = "st,pm6764tr"},
+ {}
+};
+
+/* This is the driver that will be inserted */
+static struct i2c_driver pm6764tr_driver = {
+ .driver = {
+ .name = "pm6764tr",
+ .of_match_table = of_match_ptr(pm6764tr_of_match),
+ },
+ .probe_new = pm6764tr_probe,
+ .id_table = pm6764tr_id,
+};
+
+module_i2c_driver(pm6764tr_driver);
+
+MODULE_AUTHOR("Charles Hsu");
+MODULE_DESCRIPTION("PMBus driver for ST PM6764TR");
+MODULE_LICENSE("GPL");
--
2.25.1
