From: Bongsu Jeon <[email protected]>
For stable Samsung's I2C interrupt handling, I changed the interrupt
trigger from IRQ_TYPE_LEVEL_HIGH to IRQ_TYPE_EDGE_RISING and removed
the hard coded interrupt trigger type in the i2c module for the flexible
control.
1/2 is the changed dt binding for the edge rising trigger.
2/2 is to remove the hard coded interrupt trigger type in the i2c module.
ChangeLog:
v2:
2/2
- remove the hard coded interrupt trigger type.
Bongsu Jeon (2):
dt-bindings: net: nfc: s3fwrn5: Change I2C interrupt trigger to
EDGE_RISING
nfc: s3fwrn5: Remove hard coded interrupt trigger type from the i2c
module
.../devicetree/bindings/net/nfc/samsung,s3fwrn5.yaml | 2 +-
drivers/nfc/s3fwrn5/i2c.c | 8 +++++++-
2 files changed, 8 insertions(+), 2 deletions(-)
--
2.17.1
