On Tue, Dec 08, 2020 at 08:24:08PM -0800, Utkarsh Patel wrote: > USB4 specification chapter 3 indicates that cable data rates have to be > rounded for USB4 device to operate as USB4. > With that configure cable generation value to use rounded data rates for > USB4. > > Signed-off-by: Utkarsh Patel <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]> > --- > Changes in v4: > - Removed usage of tbt_mode_vdo since data rates should always be rounded > in the case of USB4. > - Updated commit message to reflect the change. > > Changes in v3: > - Moved TBT_CABLE_ROUNDED_SUPPORT assignment to the same line. > > Changes in v2: > - No change. > --- > drivers/usb/typec/mux/intel_pmc_mux.c | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c > b/drivers/usb/typec/mux/intel_pmc_mux.c > index e58ae8a7fefb..cf37a59ce130 100644 > --- a/drivers/usb/typec/mux/intel_pmc_mux.c > +++ b/drivers/usb/typec/mux/intel_pmc_mux.c > @@ -327,6 +327,11 @@ pmc_usb_mux_usb4(struct pmc_usb_port *port, struct > typec_mux_state *state) > fallthrough; > default: > req.mode_data |= PMC_USB_ALTMODE_ACTIVE_CABLE; > + > + /* Configure data rate to rounded in the case of Active TBT3 > + * and USB4 cables. > + */ > + req.mode_data |= PMC_USB_ALTMODE_TBT_GEN(1); > break; > } > > -- > 2.17.1 -- heikki
