V831 is a new chip by Allwinner, and its functionality is a subset of
V833 (another new chip with the same die but larger pin count).

Add a DTSI file for V831.

Signed-off-by: Icenowy Zheng <icen...@aosc.io>
---
 arch/arm/boot/dts/sun8i-v831.dtsi | 244 ++++++++++++++++++++++++++++++
 1 file changed, 244 insertions(+)
 create mode 100644 arch/arm/boot/dts/sun8i-v831.dtsi

diff --git a/arch/arm/boot/dts/sun8i-v831.dtsi 
b/arch/arm/boot/dts/sun8i-v831.dtsi
new file mode 100644
index 000000000000..7ddc4d33d8b2
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-v831.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Icenowy Zheng <icen...@aosc.io>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun8i-v833-ccu.h>
+#include <dt-bindings/reset/sun8i-v833-ccu.h>
+
+/ {
+       interrupt-parent = <&gic>;
+       #address-cells = <1>;
+       #size-cells = <1>;
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "arm,cortex-a7";
+                       device_type = "cpu";
+                       reg = <0>;
+                       clocks = <&ccu CLK_CPUX>;
+               };
+       };
+
+       osc24M: osc24M_clk {
+               #clock-cells = <0>;
+               compatible = "fixed-clock";
+               clock-frequency = <24000000>;
+               clock-output-names = "osc24M";
+       };
+
+       timer {
+               compatible = "arm,armv7-timer";
+               interrupts = <GIC_PPI 13
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 14
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 11
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+                            <GIC_PPI 10
+                       (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+       };
+
+       soc {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               ccu: clock@3001000 {
+                       compatible = "allwinner,sun8i-v833-ccu";
+                       reg = <0x03001000 0x1000>;
+                       clocks = <&osc24M>, <&rtc 0>, <&rtc 2>;
+                       clock-names = "hosc", "losc", "iosc";
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+               };
+
+               watchdog: watchdog@30090a0 {
+                       compatible = "allwinner,sun8i-v831-wdt",
+                                    "allwinner,sun6i-a31-wdt";
+                       reg = <0x030090a0 0x20>;
+                       interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&osc24M>;
+               };
+
+               pio: pinctrl@300b000 {
+                       compatible = "allwinner,sun8i-v831-pinctrl";
+                       reg = <0x0300b000 0x400>;
+                       interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+                                    <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc 0>;
+                       clock-names = "apb", "hosc", "losc";
+                       gpio-controller;
+                       #gpio-cells = <3>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+
+                       mmc0_pins: mmc0-pins {
+                               pins = "PF0", "PF1", "PF2", "PF3",
+                                      "PF4", "PF5";
+                               function = "mmc0";
+                               drive-strength = <30>;
+                               bias-pull-up;
+                       };
+
+                       /omit-if-no-ref/
+                       mmc1_pins: mmc1-pins {
+                               pins = "PG0", "PG1", "PG2", "PG3",
+                                      "PG4", "PG5";
+                               function = "mmc1";
+                               drive-strength = <30>;
+                               bias-pull-up;
+                       };
+
+                       /omit-if-no-ref/
+                       spi0_qspi_pins: spi0-qspi-pins {
+                               pins = "PC0", "PC2", "PC3", "PC4", "PC5";
+                               function = "spi0";
+                       };
+
+                       /omit-if-no-ref/
+                       spi0_cs_pin: spi0-cs-pin {
+                               pins = "PC1";
+                               function = "spi0";
+                       };
+
+                       uart0_ph9_ph10_pins: uart0-ph9-ph10-pins {
+                               pins = "PH9", "PH10";
+                               function = "uart0";
+                       };
+               };
+
+               gic: interrupt-controller@3021000 {
+                       compatible = "arm,gic-400";
+                       reg = <0x03021000 0x1000>,
+                             <0x03022000 0x2000>,
+                             <0x03024000 0x2000>,
+                             <0x03026000 0x2000>;
+                       interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_HIGH)>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+               };
+
+               mmc0: mmc@4020000 {
+                       compatible = "allwinner,sun8i-v831-mmc",
+                                    "allwinner,sun50i-a64-mmc";
+                       reg = <0x04020000 0x1000>;
+                       clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+                       clock-names = "ahb", "mmc";
+                       resets = <&ccu RST_BUS_MMC0>;
+                       reset-names = "ahb";
+                       interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc1: mmc@4021000 {
+                       compatible = "allwinner,sun8i-v831-mmc",
+                                    "allwinner,sun50i-a64-mmc";
+                       reg = <0x04021000 0x1000>;
+                       clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+                       clock-names = "ahb", "mmc";
+                       resets = <&ccu RST_BUS_MMC1>;
+                       reset-names = "ahb";
+                       interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc1_pins>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               uart0: serial@5000000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x05000000 0x400>;
+                       interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART0>;
+                       resets = <&ccu RST_BUS_UART0>;
+                       status = "disabled";
+               };
+
+               uart1: serial@5000400 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x05000400 0x400>;
+                       interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART1>;
+                       resets = <&ccu RST_BUS_UART1>;
+                       status = "disabled";
+               };
+
+               uart2: serial@5000800 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x05000800 0x400>;
+                       interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART2>;
+                       resets = <&ccu RST_BUS_UART2>;
+                       status = "disabled";
+               };
+
+               uart3: serial@5000c00 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x05000c00 0x400>;
+                       interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&ccu CLK_BUS_UART3>;
+                       resets = <&ccu RST_BUS_UART3>;
+                       status = "disabled";
+               };
+
+               spi0: spi@5010000 {
+                       compatible = "allwinner,sun8i-v831-spi",
+                                    "allwinner,sun50i-h6-spi",
+                                    "allwinner,sun8i-h3-spi";
+                       reg = <0x05010000 0x1000>;
+                       interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+                       clock-names = "ahb", "mod";
+                       resets = <&ccu RST_BUS_SPI0>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               spi1: spi@5011000 {
+                       compatible = "allwinner,sun8i-v831-spi",
+                                    "allwinner,sun50i-h6-spi",
+                                    "allwinner,sun8i-h3-spi";
+                       reg = <0x05011000 0x1000>;
+                       interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+                       clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+                       clock-names = "ahb", "mod";
+                       resets = <&ccu RST_BUS_SPI1>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               rtc: rtc@7000000 {
+                       compatible = "allwinner,sun8i-v831-rtc";
+                       reg = <0x07000000 0x400>;
+                       interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+                       clock-output-names = "osc32k", "osc32k-out", "iosc";
+                       #clock-cells = <1>;
+               };
+       };
+};
-- 
2.28.0

Reply via email to