This enables more components to get a working display, panel, audio and sensors. It also updates some device tree bits to make mainline boot.
I've skipped wifi (which needs some more driver work) and devfreq (since Martin is working on that). The config changes don't depend on the DT parts so could be applied independently. The series was tested against next-20201214 and i made sure the defconfig changes also apply on top of shawnguo/imx/defconfig. changes from v1: - as per review comments by Krzysztof Kozlowski <[email protected]> https://lore.kernel.org/linux-arm-kernel/20201215091729.GC29321@kozik-lap/ - describe hardware parts not config options - rework commit messages to give more details - don't keep buck3 always on but rather make sure the board doesn't hang when resuming the gpu power domain. There's a generic fix pending for that helps all boards https://lore.kernel.org/lkml/[email protected]/ To: Rob Herring <[email protected]>,Shawn Guo <[email protected]>,Sascha Hauer <[email protected]>,Pengutronix Kernel Team <[email protected]>,Fabio Estevam <[email protected]>,NXP Linux Team <[email protected]>,Catalin Marinas <[email protected]>,Will Deacon <[email protected]>,Martin Kepplinger <[email protected]>,Angus Ainslie <[email protected]>,Krzysztof Kozlowski <[email protected]>,Bjorn Andersson <[email protected]>,Li Yang <[email protected]>,Geert Uytterhoeven <[email protected]>,Vinod Koul <[email protected]>,Anson Huang <[email protected]>,Michael Walle <[email protected]>,[email protected],[email protected],[email protected],[email protected] Guido Günther (4): arm64: defconfig: Enable Librem 5 devkit components arm64: dts: imx8mq-librem5-devkit: Tweak pmic regulators arm64: dts: imx8mq-librem5-devkit: Disable snvs_rtc arm64: dts: imx8mq-librem5-devkit: Drop custom clock settings .../dts/freescale/imx8mq-librem5-devkit.dts | 20 ++++++++++++++----- arch/arm64/configs/defconfig | 8 ++++++++ 2 files changed, 23 insertions(+), 5 deletions(-) -- 2.29.2
