On Mon, 14 Dec 2020 08:05:44 -0600
David Lechner <[email protected]> wrote:

> On 12/14/20 5:46 AM, William Breathitt Gray wrote:
> > On Sun, Dec 13, 2020 at 06:09:27PM -0600, David Lechner wrote:  
> >> The hardware doesn't support this. QPOSINIT is an initialization value
> >> that is triggered by other things. When the counter overflows, it
> >> always wraps around to zero.
> >>
> >> Fixes: f213729f6796 "counter: new TI eQEP driver"
> >> Signed-off-by: David Lechner <[email protected]>  
> > 
> > Is the QPOSINIT preprocessor define needed at all anymore, or should it 
> > also be
> > removed?  
> 
> There are already many more defines for registers that are not
> used, so I didn't remove it.
Applied to the fixes-togreg branch of iio.git and marked for stable.

Thanks,

Jonathan

> 
> > 
> > Acked-by: William Breathitt Gray <[email protected]>
> >   
> >> ---
> >>   drivers/counter/ti-eqep.c | 35 -----------------------------------
> >>   1 file changed, 35 deletions(-)
> >>
> >> diff --git a/drivers/counter/ti-eqep.c b/drivers/counter/ti-eqep.c
> >> index a60aee1a1a29..65df9ef5b5bc 100644
> >> --- a/drivers/counter/ti-eqep.c
> >> +++ b/drivers/counter/ti-eqep.c
> >> @@ -235,36 +235,6 @@ static ssize_t ti_eqep_position_ceiling_write(struct 
> >> counter_device *counter,
> >>    return len;
> >>   }
> >>   
> >> -static ssize_t ti_eqep_position_floor_read(struct counter_device *counter,
> >> -                                     struct counter_count *count,
> >> -                                     void *ext_priv, char *buf)
> >> -{
> >> -  struct ti_eqep_cnt *priv = counter->priv;
> >> -  u32 qposinit;
> >> -
> >> -  regmap_read(priv->regmap32, QPOSINIT, &qposinit);
> >> -
> >> -  return sprintf(buf, "%u\n", qposinit);
> >> -}
> >> -
> >> -static ssize_t ti_eqep_position_floor_write(struct counter_device 
> >> *counter,
> >> -                                      struct counter_count *count,
> >> -                                      void *ext_priv, const char *buf,
> >> -                                      size_t len)
> >> -{
> >> -  struct ti_eqep_cnt *priv = counter->priv;
> >> -  int err;
> >> -  u32 res;
> >> -
> >> -  err = kstrtouint(buf, 0, &res);
> >> -  if (err < 0)
> >> -          return err;
> >> -
> >> -  regmap_write(priv->regmap32, QPOSINIT, res);
> >> -
> >> -  return len;
> >> -}
> >> -
> >>   static ssize_t ti_eqep_position_enable_read(struct counter_device 
> >> *counter,
> >>                                        struct counter_count *count,
> >>                                        void *ext_priv, char *buf)
> >> @@ -301,11 +271,6 @@ static struct counter_count_ext 
> >> ti_eqep_position_ext[] = {
> >>            .read   = ti_eqep_position_ceiling_read,
> >>            .write  = ti_eqep_position_ceiling_write,
> >>    },
> >> -  {
> >> -          .name   = "floor",
> >> -          .read   = ti_eqep_position_floor_read,
> >> -          .write  = ti_eqep_position_floor_write,
> >> -  },
> >>    {
> >>            .name   = "enable",
> >>            .read   = ti_eqep_position_enable_read,
> >> -- 
> >> 2.25.1
> >>  
> 

Reply via email to