Newer SoCs starting with the Amlogic Meson G12A have more a precise
RGMII RX delay configuration register. This means more complexity in the
code. Extract the existing RGMII delay configuration code into a
separate function to make it easier to read/understand even when adding
more logic in the future.

Reviewed-by: Andrew Lunn <and...@lunn.ch>
Reviewed-by: Florian Fainelli <f.faine...@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumensti...@googlemail.com>
---
 drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c 
b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
index d2be3a7bd8fd..4937432ac70d 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-meson8b.c
@@ -268,7 +268,7 @@ static int meson8b_devm_clk_prepare_enable(struct 
meson8b_dwmac *dwmac,
        return 0;
 }
 
-static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
+static int meson8b_init_rgmii_delays(struct meson8b_dwmac *dwmac)
 {
        u32 tx_dly_config, rx_dly_config, delay_config;
        int ret;
@@ -323,6 +323,13 @@ static int meson8b_init_prg_eth(struct meson8b_dwmac 
*dwmac)
                                PRG_ETH0_ADJ_DELAY | PRG_ETH0_ADJ_SKEW,
                                delay_config);
 
+       return 0;
+}
+
+static int meson8b_init_prg_eth(struct meson8b_dwmac *dwmac)
+{
+       int ret;
+
        if (phy_interface_mode_is_rgmii(dwmac->phy_mode)) {
                /* only relevant for RMII mode -> disable in RGMII mode */
                meson8b_dwmac_mask_bits(dwmac, PRG_ETH0,
@@ -430,6 +437,10 @@ static int meson8b_dwmac_probe(struct platform_device 
*pdev)
                goto err_remove_config_dt;
        }
 
+       ret = meson8b_init_rgmii_delays(dwmac);
+       if (ret)
+               goto err_remove_config_dt;
+
        ret = meson8b_init_rgmii_tx_clk(dwmac);
        if (ret)
                goto err_remove_config_dt;
-- 
2.30.0

Reply via email to