Config dsi node for mt8183 kukui. Set panel and ports.

Several kukui boards share the same panel property and only compatible
is different. So compatible will be set in board dts for comparison
convenience.

Signed-off-by: Hsin-Yi Wang <hsi...@chromium.org>
---
Change:
v2: move compatible to board dts
---
 .../mediatek/mt8183-kukui-krane-sku176.dts    |  5 +++
 .../arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 37 +++++++++++++++++++
 2 files changed, 42 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts 
b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
index 47113e275cb52..721d16f9c3b4f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane-sku176.dts
@@ -16,3 +16,8 @@ / {
        model = "MediaTek krane sku176 board";
        compatible = "google,krane-sku176", "google,krane", "mediatek,mt8183";
 };
+
+&panel {
+        status = "okay";
+        compatible = "boe,tv101wum-nl6";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi 
b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index bf2ad1294dd30..d3d20e4773cf1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -249,6 +249,35 @@ &cpu7 {
        proc-supply = <&mt6358_vproc11_reg>;
 };
 
+&dsi0 {
+       status = "okay";
+       #address-cells = <1>;
+       #size-cells = <0>;
+       panel: panel@0 {
+               // compatible will be set in board dts
+               reg = <0>;
+               enable-gpios = <&pio 45 0>;
+               pinctrl-names = "default";
+               pinctrl-0 = <&panel_pins_default>;
+               avdd-supply = <&ppvarn_lcd>;
+               avee-supply = <&ppvarp_lcd>;
+               pp1800-supply = <&pp1800_lcd>;
+               port {
+                       panel_in: endpoint {
+                               remote-endpoint = <&dsi_out>;
+                       };
+               };
+       };
+
+       ports {
+               port {
+                       dsi_out: endpoint {
+                               remote-endpoint = <&panel_in>;
+                       };
+               };
+       };
+};
+
 &i2c0 {
        pinctrl-names = "default";
        pinctrl-0 = <&i2c0_pins>;
@@ -547,6 +576,14 @@ pins_clk {
                };
        };
 
+       panel_pins_default: panel_pins_default {
+               panel_reset {
+                       pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
+                       output-low;
+                       bias-pull-up;
+               };
+       };
+
        pwm0_pin_default: pwm0_pin_default {
                pins1 {
                        pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
-- 
2.29.2.729.g45daf8777d-goog

Reply via email to