Enable the support for USB3 controller, QMP PHY and HS PHY on SDX55 MTP.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
arch/arm/boot/dts/qcom-sdx55-mtp.dts | 29 ++++++++++++++++++++++++----
1 file changed, 25 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
index 96b6a295f813..7fec5e7a2724 100644
--- a/arch/arm/boot/dts/qcom-sdx55-mtp.dts
+++ b/arch/arm/boot/dts/qcom-sdx55-mtp.dts
@@ -111,7 +111,7 @@ vreg_s4e_1p904: smps4 {
regulator-max-microvolt = <1960000>;
};
- ldo1 {
+ vreg_l1e_bb_1p2: ldo1 {
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
@@ -129,13 +129,13 @@ ldo3 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
- ldo4 {
+ vreg_l4e_bb_0p875: ldo4 {
regulator-min-microvolt = <872000>;
regulator-max-microvolt = <872000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
- ldo5 {
+ vreg_l5e_bb_1p7: ldo5 {
regulator-min-microvolt = <1704000>;
regulator-max-microvolt = <1900000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
@@ -165,7 +165,7 @@ ldo9 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
};
- ldo10 {
+ vreg_l10e_3p1: ldo10 {
regulator-min-microvolt = <3088000>;
regulator-max-microvolt = <3088000>;
regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
@@ -228,3 +228,24 @@ nand@0 {
nand-bus-width = <8>;
};
};
+
+&usb {
+ status = "okay";
+};
+
+&usb_dwc3 {
+ dr_mode = "peripheral";
+};
+
+&usb_hsphy {
+ status = "okay";
+ vdda-pll-supply = <&vreg_l4e_bb_0p875>;
+ vdda33-supply = <&vreg_l10e_3p1>;
+ vdda18-supply = <&vreg_l5e_bb_1p7>;
+};
+
+&usb_qmpphy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l4e_bb_0p875>;
+ vdda-pll-supply = <&vreg_l1e_bb_1p2>;
+};
--
2.25.1
