Hi, This commit is also missing a commit message and you could probably get some info from your cover letter here.
On 14/01/2021 17:24:31+0100, Steen Hegelund wrote: > Signed-off-by: Steen Hegelund <[email protected]> > --- > drivers/reset/Kconfig | 8 ++ > drivers/reset/Makefile | 1 + > drivers/reset/reset-microchip-sparx5.c | 120 +++++++++++++++++++++++++ > 3 files changed, 129 insertions(+) > create mode 100644 drivers/reset/reset-microchip-sparx5.c > > diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig > index 71ab75a46491..05c240c47a8a 100644 > --- a/drivers/reset/Kconfig > +++ b/drivers/reset/Kconfig > @@ -101,6 +101,14 @@ config RESET_LPC18XX > help > This enables the reset controller driver for NXP LPC18xx/43xx SoCs. > > +config RESET_MCHP_SPARX5 > + bool "Microchip Sparx5 reset driver" > + depends on HAS_IOMEM || COMPILE_TEST > + default y if SPARX5_SWITCH > + select MFD_SYSCON > + help > + This driver supports switch core reset for the Microchip Sparx5 SoC. > + > config RESET_MESON > tristate "Meson Reset Driver" > depends on ARCH_MESON || COMPILE_TEST > diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile > index 1054123fd187..341fd9ab4bf6 100644 > --- a/drivers/reset/Makefile > +++ b/drivers/reset/Makefile > @@ -15,6 +15,7 @@ obj-$(CONFIG_RESET_IMX7) += reset-imx7.o > obj-$(CONFIG_RESET_INTEL_GW) += reset-intel-gw.o > obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o > obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o > +obj-$(CONFIG_RESET_MCHP_SPARX5) += reset-microchip-sparx5.o > obj-$(CONFIG_RESET_MESON) += reset-meson.o > obj-$(CONFIG_RESET_MESON_AUDIO_ARB) += reset-meson-audio-arb.o > obj-$(CONFIG_RESET_NPCM) += reset-npcm.o > diff --git a/drivers/reset/reset-microchip-sparx5.c > b/drivers/reset/reset-microchip-sparx5.c > new file mode 100644 > index 000000000000..0dbd2b6161ef > --- /dev/null > +++ b/drivers/reset/reset-microchip-sparx5.c > @@ -0,0 +1,120 @@ > +// SPDX-License-Identifier: GPL-2.0+ > +/* Microchip Sparx5 Switch Reset driver > + * > + * Copyright (c) 2020 Microchip Technology Inc. and its subsidiaries. > + * > + * The Sparx5 Chip Register Model can be browsed at this location: > + * https://github.com/microchip-ung/sparx-5_reginfo > + */ > +#include <linux/mfd/syscon.h> > +#include <linux/of_device.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/regmap.h> > +#include <linux/reset-controller.h> > + > +#define PROTECT_REG 0x84 > +#define PROTECT_BIT BIT(10) > +#define SOFT_RESET_REG 0x08 > +#define SOFT_RESET_BIT BIT(1) > + > +struct mchp_reset_context { > + struct regmap *cpu_ctrl; > + struct regmap *gcb_ctrl; > + struct reset_controller_dev rcdev; > +}; > + > +static int sparx5_switch_reset(struct reset_controller_dev *rcdev, > + unsigned long id) > +{ > + struct mchp_reset_context *ctx = > + container_of(rcdev, struct mchp_reset_context, rcdev); > + u32 val; > + I would ensure the reset only happens once here else I'm not sure how you could do it from the individual drivers. > + /* Make sure the core is PROTECTED from reset */ > + regmap_update_bits(ctx->cpu_ctrl, PROTECT_REG, PROTECT_BIT, > PROTECT_BIT); > + > + /* Start soft reset */ > + regmap_write(ctx->gcb_ctrl, SOFT_RESET_REG, SOFT_RESET_BIT); > + > + /* Wait for soft reset done */ > + return regmap_read_poll_timeout(ctx->gcb_ctrl, SOFT_RESET_REG, val, > + (val & SOFT_RESET_BIT) == 0, > + 1, 100); > +} > + -- Alexandre Belloni, Bootlin Embedded Linux and Kernel engineering https://bootlin.com
