Hi Georgi, On Wed, Jan 20, 2021 at 04:59:31PM +0200, Georgi Djakov wrote: > Hi Mani, > > Thanks for the patch! > > On 1/20/21 10:06, Manivannan Sadhasivam wrote: > > Add driver for the Qualcomm interconnect buses found in SDX55 based > > platforms. The topology consists of several NoCs that are controlled by > > a remote processor that collects the aggregated bandwidth for each > > master-slave pairs. > > > > Based on SM8250 driver and generated from downstream dts. > > > > Signed-off-by: Manivannan Sadhasivam <[email protected]> > > --- > > drivers/interconnect/qcom/Kconfig | 10 + > > drivers/interconnect/qcom/Makefile | 2 + > > drivers/interconnect/qcom/sdx55.c | 356 +++++++++++++++++++++++++++++ > > drivers/interconnect/qcom/sdx55.h | 70 ++++++ > > 4 files changed, 438 insertions(+) > > create mode 100644 drivers/interconnect/qcom/sdx55.c > > create mode 100644 drivers/interconnect/qcom/sdx55.h > > > > diff --git a/drivers/interconnect/qcom/Kconfig > > b/drivers/interconnect/qcom/Kconfig > > index a8f93ba265f8..6df7e2161a0a 100644 > > --- a/drivers/interconnect/qcom/Kconfig > > +++ b/drivers/interconnect/qcom/Kconfig > > @@ -65,6 +65,16 @@ config INTERCONNECT_QCOM_SDM845 > > This is a driver for the Qualcomm Network-on-Chip on sdm845-based > > platforms. > > +config INTERCONNECT_QCOM_SDX55 > > + tristate "Qualcomm SDX55 interconnect driver" > > + depends on INTERCONNECT_QCOM > > + depends on (QCOM_RPMH && QCOM_COMMAND_DB && OF) || COMPILE_TEST > > Why not use depends on INTERCONNECT_QCOM_RPMH_POSSIBLE? >
I just followed the same pattern as other RPMh based drivers. And I don't get what you are suggesting here! Can you please explain? Thanks, Mani
