On Wed, Jan 27, 2021 at 03:05:24PM +0800, Boqun Feng wrote:
> On Tue, Jan 26, 2021 at 08:40:24PM -0800, Paul E. McKenney wrote:
> > On Wed, Jan 27, 2021 at 10:42:35AM +0800, Boqun Feng wrote:
> > > Hi Paul,
> > > 
> > > On Tue, Jan 19, 2021 at 08:32:33PM -0800, [email protected] wrote:
> > > > From: "Paul E. McKenney" <[email protected]>
> > > > 
> > > > Historically, a task that has been subjected to RCU priority boosting is
> > > > deboosted at rcu_read_unlock() time.  However, with the advent of 
> > > > deferred
> > > > quiescent states, if the outermost rcu_read_unlock() was invoked with
> > > > either bottom halves, interrupts, or preemption disabled, the deboosting
> > > > will be delayed for some time.  During this time, a low-priority process
> > > > might be incorrectly running at a high real-time priority level.
> > > > 
> > > > Fortunately, rcu_read_unlock_special() already provides mechanisms for
> > > > forcing a minimal deferral of quiescent states, at least for kernels
> > > > built with CONFIG_IRQ_WORK=y.  These mechanisms are currently used
> > > > when expedited grace periods are pending that might be blocked by the
> > > > current task.  This commit therefore causes those mechanisms to also be
> > > > used in cases where the current task has been or might soon be subjected
> > > > to RCU priority boosting.  Note that this applies to all kernels built
> > > > with CONFIG_RCU_BOOST=y, regardless of whether or not they are also
> > > > built with CONFIG_PREEMPT_RT=y.
> > > > 
> > > > This approach assumes that kernels build for use with aggressive 
> > > > real-time
> > > > applications are built with CONFIG_IRQ_WORK=y.  It is likely to be far
> > > > simpler to enable CONFIG_IRQ_WORK=y than to implement a fast-deboosting
> > > > scheme that works correctly in its absence.
> > > > 
> > > > While in the area, alphabetize the rcu_preempt_deferred_qs_handler()
> > > > function's local variables.
> > > > 
> > > > Cc: Sebastian Andrzej Siewior <[email protected]>
> > > > Cc: Scott Wood <[email protected]>
> > > > Cc: Lai Jiangshan <[email protected]>
> > > > Cc: Thomas Gleixner <[email protected]>
> > > > Signed-off-by: Paul E. McKenney <[email protected]>
> > > > ---
> > > >  kernel/rcu/tree_plugin.h | 26 ++++++++++++++------------
> > > >  1 file changed, 14 insertions(+), 12 deletions(-)
> > > > 
> > > > diff --git a/kernel/rcu/tree_plugin.h b/kernel/rcu/tree_plugin.h
> > > > index 8b0feb2..fca31c6 100644
> > > > --- a/kernel/rcu/tree_plugin.h
> > > > +++ b/kernel/rcu/tree_plugin.h
> > > > @@ -660,9 +660,9 @@ static void rcu_preempt_deferred_qs_handler(struct 
> > > > irq_work *iwp)
> > > >  static void rcu_read_unlock_special(struct task_struct *t)
> > > >  {
> > > >         unsigned long flags;
> > > > +       bool irqs_were_disabled;
> > > >         bool preempt_bh_were_disabled =
> > > >                         !!(preempt_count() & (PREEMPT_MASK | 
> > > > SOFTIRQ_MASK));
> > > > -       bool irqs_were_disabled;
> > > >  
> > > >         /* NMI handlers cannot block and cannot safely manipulate 
> > > > state. */
> > > >         if (in_nmi())
> > > > @@ -671,30 +671,32 @@ static void rcu_read_unlock_special(struct 
> > > > task_struct *t)
> > > >         local_irq_save(flags);
> > > >         irqs_were_disabled = irqs_disabled_flags(flags);
> > > >         if (preempt_bh_were_disabled || irqs_were_disabled) {
> > > > -               bool exp;
> > > > +               bool expboost; // Expedited GP in flight or possible 
> > > > boosting.
> > > >                 struct rcu_data *rdp = this_cpu_ptr(&rcu_data);
> > > >                 struct rcu_node *rnp = rdp->mynode;
> > > >  
> > > > -               exp = (t->rcu_blocked_node &&
> > > > -                      READ_ONCE(t->rcu_blocked_node->exp_tasks)) ||
> > > > -                     (rdp->grpmask & READ_ONCE(rnp->expmask));
> > > > +               expboost = (t->rcu_blocked_node && 
> > > > READ_ONCE(t->rcu_blocked_node->exp_tasks)) ||
> > > > +                          (rdp->grpmask & READ_ONCE(rnp->expmask)) ||
> > > > +                          (IS_ENABLED(CONFIG_RCU_BOOST) && 
> > > > irqs_were_disabled &&
> > > > +                           t->rcu_blocked_node);
> > > 
> > > I take it that you check whether possible boosting is in progress via
> > > the last expression of "||", ie:
> > > 
> > >   (IS_ENABLED(CONFIG_RCU_BOOST) && irqs_were_disabled &&
> > >   t->rcu_blocked_node)
> > > 
> > > if so, I don't see the point of using the new "expboost" in the
> > > raise_softirq_irqoff() branch, because if in_irq() is false, we only
> > > raise softirq if irqs_were_disabled is false (otherwise, we may take the
> > > risk of doing a wakeup with a pi or rq lock held, IIRC), and the
> > > boosting part of the "expboost" above is only true if irqs_were_disabled
> > > is true, so using expboost makes no different here.
> > 
> > I started out with two local variables, one for each side of the ||,
> > but this looked nicer.
> > 
> > > >                 // Need to defer quiescent state until everything is 
> > > > enabled.
> > > > -               if (use_softirq && (in_irq() || (exp && 
> > > > !irqs_were_disabled))) {
> > > > +               if (use_softirq && (in_irq() || (expboost && 
> > > > !irqs_were_disabled))) {
> > > >                         // Using softirq, safe to awaken, and either the
> > > > -                       // wakeup is free or there is an expedited GP.
> > > > +                       // wakeup is free or there is either an 
> > > > expedited
> > > > +                       // GP in flight or a potential need to deboost.
> > > 
> > > and this comment will be incorrect, we won't enter here solely because
> > > there is a potential need to deboost.
> > 
> > You are quite right, given the !irqs_were_disabled.
> > 
> > > That said, why the boosting condition has a "irqs_were_disabled" in it?
> > > What if a task gets boosted because of RCU boosting, and exit the RCU
> > > read-side c.s. with irq enabled and there is no expedited GP in flight,
> > > will the task get deboosted quickly enough?
> > 
> > Because if !irqs_were_disabled, there will be a local_bh_enable() or
> > a preempt_enable(), give or take preempt_enable_no_resched(), and those
> > will both get the scheduler involved because of the set_tsk_need_resched()
> > and set_preempt_need_resched().  There is thus no need for the irq_work
> > unless irqs_were_disabled.
> 
> But if so, shouldn't we check !preemp_bh_were_disabled instead of
> irqs_were_disabled? I.e. there is no need for the irq_work unless
> preemption and bottom halves are all enabled (IOW, we cannot expect the
> task to get into scheduler soon via *_enable()).
> 
> Current what we are doing is if irqs_were_disabled is true (along with
> other checks pass), we queue a irq work, but in this situation,
> preept_bh_were_disabled might be true as well, which means there may be
> a preempt_enable() not far away.

Except that the preempt_enable() might be executed before the
local_irq_enable(), in which case the scheduler would not be invoked.

> Consider the following simple example, if we have a in-flight gp or
> this task has been boosted:
> 
>       preempt_disable();
>       local_irq_disable();
>       rcu_read_lock();
>       ...
>       rcu_read_unlock();
>       // current we will queue a irq work here.
>       local_irq_enable();
>       preempt_enable();
>       // but we will enter scheduelr here./

And consider this variation:

        preempt_disable();
        local_irq_disable();
        rcu_read_lock();
        ...
        rcu_read_unlock();
        // Currently, we will queue a irq work here...
        preempt_enable();
        // ...because we cannot yet enter the scheduler.
        local_irq_enable();
        // Now we can but we won't because no irq_work has been scheduled.

However, the expboost condition is missing one thing, namely strict
grace periods.  It should read as follows:

                expboost = (t->rcu_blocked_node && 
READ_ONCE(t->rcu_blocked_node->exp_tasks)) ||
                           (rdp->grpmask & READ_ONCE(rnp->expmask)) ||
                           IS_ENABLED(CONFIG_RCU_STRICT_GRACE_PERIOD) ||
                           (IS_ENABLED(CONFIG_RCU_BOOST) && irqs_were_disabled 
&&
                            t->rcu_blocked_node);

Not that this has anything to do with RCU priority boosting, but while
in the area...

                                                        Thanx, Paul

> > I am not all that worried about preempt_enable_no_resched() because
> > it is a problem for RT even in the absence of RCU priority boosting.
> > And the current uses appear to be in things that one would not use while
> > running an RT workload.
> > 
> > > Maybe I'm missing some subtle?
> > 
> > Or maybe I am.  Thoughts?
> > 
> >                                                     Thanx, Paul
> > 
> > > Regards,
> > > Boqun
> > > 
> > > >                         raise_softirq_irqoff(RCU_SOFTIRQ);
> > > >                 } else {
> > > >                         // Enabling BH or preempt does reschedule, so...
> > > > -                       // Also if no expediting, slow is OK.
> > > > -                       // Plus nohz_full CPUs eventually get tick 
> > > > enabled.
> > > > +                       // Also if no expediting and no possible 
> > > > deboosting,
> > > > +                       // slow is OK.  Plus nohz_full CPUs eventually 
> > > > get
> > > > +                       // tick enabled.
> > > >                         set_tsk_need_resched(current);
> > > >                         set_preempt_need_resched();
> > > >                         if (IS_ENABLED(CONFIG_IRQ_WORK) && 
> > > > irqs_were_disabled &&
> 
> so the irqs_were_disabled here should be !preempt_bh_were_disabled?
> 
> Regards,
> Boqun
> 
> > > > -                           !rdp->defer_qs_iw_pending && exp && 
> > > > cpu_online(rdp->cpu)) {
> > > > +                           expboost && !rdp->defer_qs_iw_pending && 
> > > > cpu_online(rdp->cpu)) {
> > > >                                 // Get scheduler to re-evaluate and 
> > > > call hooks.
> > > >                                 // If !IRQ_WORK, FQS scan will 
> > > > eventually IPI.
> > > > -                               init_irq_work(&rdp->defer_qs_iw,
> > > > -                                             
> > > > rcu_preempt_deferred_qs_handler);
> > > > +                               init_irq_work(&rdp->defer_qs_iw, 
> > > > rcu_preempt_deferred_qs_handler);
> > > >                                 rdp->defer_qs_iw_pending = true;
> > > >                                 irq_work_queue_on(&rdp->defer_qs_iw, 
> > > > rdp->cpu);
> > > >                         }
> > > > -- 
> > > > 2.9.5
> > > > 

Reply via email to