On Sun 24 Jan 13:49 CST 2021, Jonathan Albrieux wrote:
> On Sun, Jan 24, 2021 at 04:51:31PM +0100, Stephan Gerhold wrote:
> > On Sun, Jan 24, 2021 at 04:07:19PM +0100, Konrad Dybcio wrote:
> > > > +&blsp_i2c3 {
> > > > + status = "okay";
> > > > +
> > > > + imu@68 {
> > > > + compatible = "bosch,bmi160";
> > > > + reg = <0x68>;
> > > > +
> > > > + vdd-supply = <&pm8916_l17>;
> > > > + vddio-supply = <&pm8916_l6>;
> > > > +
> > > > + mount-matrix = "0", "1", "0",
> > > > + "-1", "0", "0",
> > > > + "0", "0", "1";
> > > > + };
> > > > +
> > > > + magnetometer@d {
> > > > + compatible = "asahi-kasei,ak09911";
> > > > + reg = <0x0d>;
> > > > +
> > > > + vdd-supply = <&pm8916_l17>;
> > > > + vid-supply = <&pm8916_l6>;
> > > > +
> > > > + reset-gpios = <&msmgpio 111 GPIO_ACTIVE_LOW>;
> > > > +
> > > > + pinctrl-names = "default";
> > > > + pinctrl-0 = <&mag_reset_default>;
> > > > + };
> > > > +};
> > >
> > > Please sort I2C devices by their address.
> > >
> >
> > +1 :)
> >
> Thank you Konrad, thank you Stephan, I'll fix the order!
>
> > >
> > > > };
> > > >
> > > > + mag_reset_default: mag-reset-default {
> > > > + pins = "gpio111";
> > > > + function = "gpio";
> > > > +
> > > > + drive-strength = <2>;
> > > > + bias-disable;
> > > > + };
> > > > +
> > >
> > > Please add this after gpio110 to keep it sorted gpio-number-wise.
> > >
> >
> > This is ordered alphabetically. I haven't seen gpio-number order
> > anywhere yet... :)
> >
> Let me know if this order has to be changed, meanwhile I'll prepare
> a v2 for the i2c device order and will prepare a v3 in case this
> order too has to be changed.
>
I'm happy with having these sorted alphabetically.
Regards,
Bjorn
