[PATCH 6/7] arm64: dts: qcom: sm8350-mtp: Enable remoteprocs

[Vinod Koul]

This enabled the four remoteprocs found in SM8350, audio, compute, modem
and sensor for MTP platform and adds firmware for them.

Signed-off-by: Vinod Koul <vk...@kernel.org>
---
 arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts 
b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
index e544fe6b421f..98a517edd442 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -32,6 +32,11 @@ vph_pwr: vph-pwr-regulator {
        };
 };
 
+&adsp {
+       status = "okay";
+       firmware-name = "qcom/sm8350/adsp.mbn";
+};
+
 &apps_rsc {
        pm8350-rpmh-regulators {
                compatible = "qcom,pm8350-rpmh-regulators";
@@ -265,10 +270,25 @@ vreg_l13c_3p0: ldo13 {
        };
 };
 
+&cdsp {
+       status = "okay";
+       firmware-name = "qcom/sm8350/cdsp.mbn";
+};
+
+&mpss {
+       status = "okay";
+       firmware-name = "qcom/sm8350/modem.mbn";
+};
+
 &qupv3_id_1 {
        status = "okay";
 };
 
+&slpi {
+       status = "okay";
+       firmware-name = "qcom/sm8350/slpi.mbn";
+};
+
 &tlmm {
        gpio-reserved-ranges = <52 8>;
 };
-- 
2.26.2