Am Mittwoch, 9. Januar 2008 schrieb Fengguang Wu: Thank your for the hint with the filesystems!
> Thank you for the clue. However I cannot reproduce the bug on > ext2/2.6.24-rc7. Can you provide more details? Thank you. I attached some more information. I'm using the ata_piix driver for my PATA disk and cdrom drive and booted with hpet=force. Kernel 2.6.23.X has been patched with the -hrt patches to enable the hidden hpet time on the ICH4-M chipset. I just rebooted the notebook and mounted /tmp again as ext2 and now the iowait problem is back. Seems to be reproducible on my computer. What additional information do you need? regards, Jörg -- PGP Key: send mail with subject 'SEND PGP-KEY' PGP Key-ID: FD 4E 21 1D PGP Fingerprint: 388A872AFC5649D3 BCEC65778BE0C605
00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03) 00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) 00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) 00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) 00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) 00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01) 00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01) 00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) 00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 [Mobility FireGL 9000] (rev 02) 02:00.0 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01) 02:00.1 CardBus bridge: Texas Instruments PCI1520 PC card Cardbus Controller (rev 01) 02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03) 02:02.0 Ethernet controller: Atheros Communications, Inc. AR5211 802.11ab NIC (rev 01)
Module Size Used by radeon 112644 2 drm 73684 3 radeon binfmt_misc 10568 1 rfcomm 35924 1 l2cap 22660 5 rfcomm bluetooth 51872 4 rfcomm,l2cap snd_rtctimer 3616 1 nfsd 201652 13 auth_rpcgss 39492 1 nfsd exportfs 4544 1 nfsd af_packet 20292 4 autofs4 20356 2 ipt_MASQUERADE 3328 3 iptable_nat 6660 1 nf_nat 17948 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 16328 11 iptable_nat xt_state 2304 9 ipt_LOG 5632 9 xt_limit 2432 9 ipt_REJECT 4288 2 xt_mark 1728 2 xt_tcpudp 2944 12 xt_mac 1728 38 iptable_filter 2752 1 xt_MARK 2048 3 xt_multiport 2880 8 iptable_mangle 2560 1 ip_tables 12168 3 iptable_nat,iptable_filter,iptable_mangle x_tables 13828 12 ipt_MASQUERADE,iptable_nat,xt_state,ipt_LOG,xt_limit,ipt_REJECT,xt_mark,xt_tcpudp,xt_mac,xt_MARK,xt_multiport,ip_tables nf_conntrack_ftp 8224 0 nf_conntrack 61200 6 ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_state,nf_conntrack_ftp cpufreq_userspace 3800 0 cpufreq_stats 4868 0 cpufreq_powersave 1600 0 nfs 227136 0 lockd 59576 3 nfsd,nfs nfs_acl 3264 2 nfsd,nfs sunrpc 169308 11 nfsd,auth_rpcgss,nfs,lockd,nfs_acl deflate 3520 0 zlib_deflate 17960 1 deflate zlib_inflate 15488 1 deflate twofish 6592 0 twofish_common 36416 1 twofish camellia 28736 0 serpent 18368 0 blowfish 8128 0 des_generic 16128 0 cbc 4288 0 ecb 3328 0 aes_generic 26536 0 aes_i586 32436 0 geode_aes 5700 0 blkcipher 6404 3 cbc,ecb,geode_aes xcbc 5384 0 sha256_generic 11008 0 sha1_generic 2432 0 md5 3840 0 crypto_null 2368 0 hmac 4352 0 crypto_hash 2048 2 xcbc,hmac cryptomgr 3520 0 crypto_algapi 16256 19 deflate,twofish,camellia,serpent,blowfish,des_generic,cbc,ecb,aes_generic,aes_i586,geode_aes,blkcipher,xcbc,sha256_generic,sha1_generic,md5,crypto_null,hmac,cryptomgr af_key 35536 0 nls_utf8 1920 1 ntfs 92900 1 nls_base 7040 2 nls_utf8,ntfs ext2 65160 1 fuse 44948 1 ebtable_broute 1984 0 bridge 49112 1 ebtable_broute llc 7128 1 bridge ebtable_nat 2176 0 ebtable_filter 2176 0 ebtables 17024 3 ebtable_broute,ebtable_nat,ebtable_filter deadline_iosched 5376 0 as_iosched 12488 0 ircomm_tty 22728 0 ircomm 12868 1 ircomm_tty tun 10816 0 acpi_cpufreq 6732 1 sbs 14024 0 sbshc 6656 1 sbs joydev 11008 0 snd_intel8x0 31260 2 snd_intel8x0m 16588 4 snd_ac97_codec 92644 2 snd_intel8x0,snd_intel8x0m ac97_bus 1920 1 snd_ac97_codec snd_pcm_oss 43040 0 snd_pcm 75976 6 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss snd_mixer_oss 15552 1 snd_pcm_oss irtty_sir 5952 0 sir_dev 13508 1 irtty_sir nsc_ircc 17040 0 irda 108680 4 ircomm_tty,ircomm,sir_dev,nsc_ircc crc_ccitt 1984 1 irda snd_seq_oss 29460 0 parport_pc 36092 0 parport 33544 1 parport_pc snd_seq_midi 8800 0 snd_rawmidi 23200 1 snd_seq_midi 8250_pnp 9472 0 snd_seq_midi_event 6656 2 snd_seq_oss,snd_seq_midi snd_seq 48732 6 snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 21572 3 snd_rtctimer,snd_pcm,snd_seq snd_seq_device 7820 4 snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq yenta_socket 24268 2 rsrc_nonstatic 11584 1 yenta_socket pcmcia 36660 0 firmware_class 9216 1 pcmcia snd 50644 22 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device pcmcia_core 36688 3 yenta_socket,rsrc_nonstatic,pcmcia serio_raw 6404 0 pcspkr 2624 0 psmouse 36176 0 soundcore 7364 1 snd snd_page_alloc 10184 3 snd_intel8x0,snd_intel8x0m,snd_pcm 8250_pci 22912 0 8250 21880 2 8250_pnp,8250_pci serial_core 20480 1 8250 i2c_i801 8272 0 rng_core 4804 0 iTCO_wdt 11616 0 iTCO_vendor_support 3652 1 iTCO_wdt battery 13252 0 ac 5892 0 power_supply 9604 3 sbs,battery,ac video 18192 0 output 3456 1 video button 8080 0 intel_agp 22868 1 agpgart 30896 2 drm,intel_agp evdev 10752 7 ext3 121032 2 jbd 44116 1 ext3 mbcache 8192 2 ext2,ext3 sg 32800 0 sr_mod 15396 0 cdrom 32604 1 sr_mod sd_mod 25680 6 ata_generic 7172 0 usbhid 40100 0 hid 26628 1 usbhid ff_memless 5128 1 usbhid ata_piix 17476 5 floppy 51632 0 pata_acpi 6976 0 e1000 109824 0 libata 144016 3 ata_generic,ata_piix,pata_acpi scsi_mod 140948 4 sg,sr_mod,sd_mod,libata ehci_hcd 31372 0 uhci_hcd 22668 0 usbcore 131256 4 usbhid,ehci_hcd,uhci_hcd thermal 15580 0 processor 28016 3 acpi_cpufreq,thermal fan 4356 0 unix 27220 1085 cpufreq_conservative 6752 0 cpufreq_ondemand 7608 1 freq_table 4100 3 cpufreq_stats,acpi_cpufreq,cpufreq_ondemand thinkpad_acpi 49296 0 hwmon 3092 1 thinkpad_acpi nvram 8136 1 thinkpad_acpi fbcon 37976 72 tileblit 2368 1 fbcon font 8320 1 fbcon bitblit 5184 1 fbcon softcursor 2112 1 bitblit radeonfb 97392 1 fb 45768 5 fbcon,tileblit,bitblit,softcursor,radeonfb fb_ddc 2432 1 radeonfb backlight 4932 3 video,thinkpad_acpi,radeonfb i2c_algo_bit 5828 1 radeonfb cfbcopyarea 3264 1 radeonfb i2c_core 22224 4 i2c_i801,radeonfb,fb_ddc,i2c_algo_bit cfbimgblt 2624 1 radeonfb cfbfillrect 3392 1 radeonfb
river thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for hkey thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle HKEY for hkey thinkpad_acpi: wan_init: wan is not supported, status 0xf7ed8e5c thinkpad_acpi: ibm_init: probing for video thinkpad_acpi: video_init: initializing video subdriver thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for vid thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \_SB.PCI0.AGP.VID for vid thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for vid2 thinkpad_acpi: drv_acpi_handle_init: ACPI handle for vid2 not found thinkpad_acpi: video_init: video is supported, mode 3 thinkpad_acpi: ibm_init: video installed thinkpad_acpi: ibm_init: probing for light thinkpad_acpi: light_init: initializing light subdriver thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for ledb thinkpad_acpi: drv_acpi_handle_init: ACPI handle for ledb not found thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for lght thinkpad_acpi: drv_acpi_handle_init: ACPI handle for lght not found thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for cmos thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \UCMS for cmos thinkpad_acpi: light_init: light is supported thinkpad_acpi: ibm_init: light installed thinkpad_acpi: ibm_init: probing for bay thinkpad_acpi: bay_init: initializing bay subdriver thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for bay thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \_SB.PCI0.IDE0.SCND.MSTR for bay thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for bay_ej thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle _EJ0 for bay_ej thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for bay2 thinkpad_acpi: drv_acpi_handle_init: ACPI handle for bay2 not found thinkpad_acpi: bay_init: bay 1: status supported, eject supported; bay 2: status not supported, eject not supported thinkpad_acpi: setup_acpi_notify: setting up ACPI notify for bay thinkpad_acpi: ibm_init: bay installed thinkpad_acpi: ibm_init: probing for cmos thinkpad_acpi: cmos_init: initializing cmos commands subdriver thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for cmos thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle \UCMS for cmos thinkpad_acpi: cmos_init: cmos commands are supported thinkpad_acpi: ibm_init: cmos installed thinkpad_acpi: ibm_init: probing for led thinkpad_acpi: led_init: initializing LED subdriver thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for led thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle LED for led thinkpad_acpi: led_init: LED commands are supported, mode 3 thinkpad_acpi: ibm_init: led installed thinkpad_acpi: ibm_init: probing for beep thinkpad_acpi: beep_init: initializing beep subdriver thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for beep thinkpad_acpi: drv_acpi_handle_init: Found ACPI handle BEEP for beep thinkpad_acpi: beep_init: beep is supported thinkpad_acpi: ibm_init: beep installed thinkpad_acpi: ibm_init: probing for thermal thinkpad_acpi: thermal_init: initializing thermal subdriver thinkpad_acpi: thermal_init: thermal is supported, mode 3 thinkpad_acpi: ibm_init: thermal installed thinkpad_acpi: ibm_init: probing for ecdump thinkpad_acpi: ibm_init: ecdump installed thinkpad_acpi: ibm_init: probing for brightness thinkpad_acpi: brightness_init: initializing brightness subdriver thinkpad_acpi: brightness_init: selected brightness_mode=3 thinkpad_acpi: brightness_init: brightness is supported thinkpad_acpi: ibm_init: brightness installed thinkpad_acpi: ibm_init: probing for volume thinkpad_acpi: ibm_init: volume installed thinkpad_acpi: ibm_init: probing for fan thinkpad_acpi: fan_init: initializing fan subdriver thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for fans thinkpad_acpi: drv_acpi_handle_init: ACPI handle for fans not found thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for gfan thinkpad_acpi: drv_acpi_handle_init: ACPI handle for gfan not found thinkpad_acpi: drv_acpi_handle_init: trying to locate ACPI handle for sfan thinkpad_acpi: drv_acpi_handle_init: ACPI handle for sfan not found thinkpad_acpi: fan_init: fan is supported, modes 2, 2 thinkpad_acpi: ibm_init: fan installed input: ThinkPad Extra Buttons as /class/input/input1 NET: Registered protocol family 1 ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) ACPI: Processor [CPU] (supports 8 throttling states) Marking TSC unstable due to: TSC halts in idle. Time: hpet clocksource has been installed. ACPI: Thermal Zone [THM0] (50 C) usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected SCSI subsystem initialized ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected Intel(R) PRO/1000 Network Driver - version 7.3.20-k2 Copyright (c) 1999-2006 Intel Corporation. libata version 3.00 loaded. ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 e1000: 0000:02:01.0: e1000_validate_option: PHY Smart Power Down Enabled e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:16:41:10:19:11 usb 2-1: new low speed USB device using uhci_hcd and address 2 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.1 to 64 ACPI: PCI interrupt for device 0000:00:1f.1 disabled ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15 usb 2-1: configuration #1 chosen from 1 choice usbcore: registered new interface driver hiddev input: Logitech Optical USB Mouse as /class/input/input2 input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1 usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver ata1.00: ATA-7: SAMSUNG HM160JC, AP100-16, max UDMA/100 ata1.00: 312581808 sectors, multi 16: LBA48 ata1.00: configured for UDMA/100 ata2.00: ATAPI: UJDA745 DVD/CDRW, 1.06, max UDMA/33 ata2.00: configured for UDMA/33 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM160JC AP10 PQ: 0 ANSI: 5 scsi 1:0:0:0: CD-ROM MATSHITA UJDA745 DVD/CDRW 1.06 PQ: 0 ANSI: 5 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Driver 'sr' needs updating - please use bus_type methods sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 sda6 sda7 sda8 > sd 0:0:0:0: [sda] Attached SCSI disk sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 Attempting manual resume swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000 swsusp: Basic memory bitmaps created swsusp: Basic memory bitmaps freed kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Linux agpgart interface v0.102 agpgart: Detected an Intel 855PM Chipset. agpgart: AGP aperture is 256M @ 0xd0000000 input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /class/input/input4 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /class/input/input5 ACPI: Sleep Button (CM) [SLPB] input: Video Bus as /class/input/input6 ACPI: Video Device [VID] (multi-head: yes rom: no post: no) ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery present) iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) intel_rng: FWH not detected ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 ACPI: PCI interrupt for device 0000:00:1f.6 disabled input: PC Speaker as /class/input/input7 Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64 Yenta: ISA IRQ mask 0x04b8, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff cs: IO port probe 0x4000-0x8fff: clean. pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 serio: Synaptics pass-through port at isa0060/serio1/input0 Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64 input: SynPS/2 Synaptics TouchPad as /class/input/input8 parport_pc 00:0b: reported by Plug and Play ACPI parport0: PC-style at 0x3bc (0x7bc), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA] NET: Registered protocol family 23 nsc-ircc 00:0c: activated nsc-ircc, chip->init nsc-ircc, Found chip at base=0x02e nsc-ircc, driver loaded (Dag Brattli) IrDA: Registered device irda0 nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 Yenta: ISA IRQ mask 0x0430, PCI irq 11 Socket status: 30000006 pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff cs: IO port probe 0x4000-0x8fff: clean. pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.6 to 64 ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 PCI: Setting latency timer of device 0000:00:1f.5 to 64 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0xa00-0xaff: clean. cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0x800-0x8ff: clean. cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7 cs: IO port probe 0xa00-0xaff: clean. intel8x0_measure_ac97_clock: measured 52955 usecs intel8x0: measured clock 207 rejected intel8x0: clocking to 48000 Adding 1951856k swap on /dev/sda5. Priority:-1 extents:1 across:1951856k EXT3 FS on sda6, internal journal tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <[EMAIL PROTECTED]> IrCOMM protocol (Dag Brattli) io scheduler anticipatory registered io scheduler deadline registered Ebtables v2.0 registered Bridge firewalling registered fuse init (API version 7.9) EXT2-fs warning (device sda7): ext2_fill_super: mounting ext3 filesystem as ext2 kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. NTFS driver 2.1.29 [Flags: R/O MODULE]. NTFS volume version 3.1. IBM TrackPoint firmware: 0x0e, buttons: 3/3 input: TPPS/2 IBM TrackPoint as /class/input/input9 NET: Registered protocol family 15 padlock: VIA PadLock Hash Engine not detected. padlock: VIA PadLock Hash Engine not detected. padlock: VIA PadLock not detected. RPC: Registered udp transport module. RPC: Registered tcp transport module. nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team Clocksource tsc unstable (delta = -197916262 ns) e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX NET: Registered protocol family 17 Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: starting 90-second grace period Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 [drm] Initialized drm 1.1.0 20060810 [drm] Initialized radeon 1.28.0 20060524 on minor 0 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [drm] Setting GART location based on new memory map [drm] Loading R200 Microcode [drm] writeback test succeeded in 2 usecs
