Hi Jagan
On 2/24/21 7:05 PM, Jagan Teki wrote:
On Mon, Jan 25, 2021 at 8:35 PM Alexandre TORGUE
<[email protected]> wrote:
Hi,
On 12/23/20 8:13 PM, Jagan Teki wrote:
MicroGEA STM32MP1 is an EDIMM SoM based on STM32MP157A from Engicam.
General features:
- STM32MP157AAC
- Up to 1GB DDR3L-800
- 512MB Nand flash
- I2S
MicroGEA STM32MP1 needs to mount on top of Engicam MicroDev carrier
boards for creating complete platform solutions.
Add support for it.
Signed-off-by: Matteo Lisi <[email protected]>
Signed-off-by: Francesco Utel <[email protected]>
Signed-off-by: Mirko Ardinghi <[email protected]>
Signed-off-by: Jagan Teki <[email protected]>
---
.../dts/stm32mp157a-microgea-stm32mp1.dtsi | 147 ++++++++++++++++++
1 file changed, 147 insertions(+)
create mode 100644 arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
diff --git a/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
new file mode 100644
index 000000000000..97d569107bfe
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-microgea-stm32mp1.dtsi
@@ -0,0 +1,147 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
+/*
+ * Copyright (c) STMicroelectronics 2019 - All Rights Reserved
+ * Copyright (c) 2020 Engicam srl
+ * Copyright (c) 2020 Amarula Solutons(India)
+ */
+
If STM32MP157AAC is soldered onto this board, you should include SoC
dtsi here and no into MicroDev 2.0 board. No ?
No, it's an SoM dtsi. and it can be associated with the respective
carrier board and include files are attached in its dts.
Please check the next patches on this series.
Ok, I thought it was a mistake as you mentioned "- STM32MP157AAC" in
your commit message.
regards
alex
Jagan.
