On Fri, 2021-02-26 at 16:35 +0900, Daejun Park wrote:
> 
> 
>  static void __ufshpb_evict_region(struct ufshpb_lu *hpb,
>                                 struct ufshpb_region *rgn)
>  {
> @@ -1209,6 +1579,16 @@ static void ufshpb_lu_parameter_init(struct
> ufs_hba *hba,
>       u32 entries_per_rgn;
>       u64 rgn_mem_size, tmp;
>  
> +     /* for pre_req */
> +     if (hpb_dev_info->max_hpb_single_cmd)
> +             hpb->pre_req_min_tr_len = hpb_dev_info-
> >max_hpb_single_cmd;
> +     else
> +             hpb->pre_req_min_tr_len = HPB_MULTI_CHUNK_LOW;


Here is not correct. according to Spec:

The size is calculated as ( bMAX_DATA_SIZE_FOR_HPB_SINGLE_CMD +1 )*4KB.
00h: 4KB
01h: 8KB
02h: 12KB
03h: 16KB
...
FEh: 1020KB
FFh: 1024KB

so, here if hpb_dev_info->max_hpb_single_cmd is 0x00, means 4KB, not
36KB.



> +     hpb->pre_req_max_tr_len = max(HPB_MULTI_CHUNK_HIGH,
> +                                   hpb->pre_req_min_tr_len);
> +
> 
>  out:
>       /* All LUs are initialized */
>       if (atomic_dec_and_test(&hba->ufshpb_dev.slave_conf_cnt))
> @@ -1812,8 +2307,9 @@ void ufshpb_get_geo_info(struct ufs_hba *hba,
> u8 *geo_buf)
>  void ufshpb_get_dev_info(struct ufs_hba *hba, u8 *desc_buf)
>  {
>       struct ufshpb_dev_info *hpb_dev_info = &hba->ufshpb_dev;
> -     int version;
> +     int version, ret;
>       u8 hpb_mode;
> +     u32 max_hpb_sigle_cmd = 0;
>  
>       hpb_mode = desc_buf[DEVICE_DESC_PARAM_HPB_CONTROL];
>       if (hpb_mode == HPB_HOST_CONTROL) {
> @@ -1824,13 +2320,27 @@ void ufshpb_get_dev_info(struct ufs_hba *hba,
> u8 *desc_buf)
>       }
>  
>       version = get_unaligned_be16(desc_buf +
> DEVICE_DESC_PARAM_HPB_VER);
> -     if (version != HPB_SUPPORT_VERSION) {
> +     if ((version != HPB_SUPPORT_VERSION) &&
> +         (version != HPB_SUPPORT_LEGACY_VERSION)) {
>               dev_err(hba->dev, "%s: HPB %x version is not
> supported.\n",
>                       __func__, version);
>               hpb_dev_info->hpb_disabled = true;
>               return;
>       }
>  
> +     if (version == HPB_SUPPORT_LEGACY_VERSION)
> +             hpb_dev_info->is_legacy = true;
> +
> +     pm_runtime_get_sync(hba->dev);
> +     ret = ufshcd_query_attr_retry(hba, UPIU_QUERY_OPCODE_READ_ATTR,
> +             QUERY_ATTR_IDN_MAX_HPB_SINGLE_CMD, 0, 0,
> &max_hpb_sigle_cmd);
> +     pm_runtime_put_sync(hba->dev);
> +
> +     if (ret)
> +             dev_err(hba->dev, "%s: idn: read max size of single hpb
> cmd query request failed",
> +                     __func__);
> +     hpb_dev_info->max_hpb_single_cmd = max_hpb_sigle_cmd;
> +

Here you didn't add 1, if you read out the
QUERY_ATTR_IDN_MAX_HPB_SINGLE_CMD == 7, means device can support
maximum HPB Data size for using single HPB command is 7+1
((7+1)*4=32KB), not 7.


Bean




Reply via email to