This GPIO driver is for the Pensando Elba SoC which
provides control of four chip selects on two SPI busses.

Signed-off-by: Brad Larson <b...@pensando.io>
---
 drivers/gpio/Kconfig           |   6 ++
 drivers/gpio/Makefile          |   1 +
 drivers/gpio/gpio-elba-spics.c | 120 +++++++++++++++++++++++++++++++++
 3 files changed, 127 insertions(+)
 create mode 100644 drivers/gpio/gpio-elba-spics.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index e3607ec4c2e8..d99bc82aa8fa 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -241,6 +241,12 @@ config GPIO_EIC_SPRD
        help
          Say yes here to support Spreadtrum EIC device.
 
+config GPIO_ELBA_SPICS
+       bool "Pensando Elba SPI chip-select"
+       depends on ARCH_PENSANDO_ELBA_SOC
+       help
+         Say yes here to support the Pensndo Elba SoC SPI chip-select driver
+
 config GPIO_EM
        tristate "Emma Mobile GPIO"
        depends on (ARCH_EMEV2 || COMPILE_TEST) && OF_GPIO
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c58a90a3c3b1..c5c7acad371b 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_GPIO_DAVINCI)            += gpio-davinci.o
 obj-$(CONFIG_GPIO_DLN2)                        += gpio-dln2.o
 obj-$(CONFIG_GPIO_DWAPB)               += gpio-dwapb.o
 obj-$(CONFIG_GPIO_EIC_SPRD)            += gpio-eic-sprd.o
+obj-$(CONFIG_GPIO_ELBA_SPICS)          += gpio-elba-spics.o
 obj-$(CONFIG_GPIO_EM)                  += gpio-em.o
 obj-$(CONFIG_GPIO_EP93XX)              += gpio-ep93xx.o
 obj-$(CONFIG_GPIO_EXAR)                        += gpio-exar.o
diff --git a/drivers/gpio/gpio-elba-spics.c b/drivers/gpio/gpio-elba-spics.c
new file mode 100644
index 000000000000..a845525cf2a3
--- /dev/null
+++ b/drivers/gpio/gpio-elba-spics.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Pensando Elba ASIC SPI chip select driver
+ *
+ * Copyright (c) 2020-2021, Pensando Systems Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+
+/*
+ * pin:             3            2        |       1            0
+ * bit:         7------6------5------4----|---3------2------1------0
+ *     cs1  cs1_ovr  cs0  cs0_ovr |  cs1  cs1_ovr  cs0  cs0_ovr
+ *                ssi1            |             ssi0
+ */
+#define SPICS_PIN_SHIFT(pin)   (2 * (pin))
+#define SPICS_MASK(pin)                (0x3 << SPICS_PIN_SHIFT(pin))
+#define SPICS_SET(pin, val)    ((((val) << 1) | 0x1) << SPICS_PIN_SHIFT(pin))
+
+struct elba_spics_priv {
+       void __iomem *base;
+       spinlock_t lock;
+       struct gpio_chip chip;
+};
+
+static int elba_spics_get_value(struct gpio_chip *chip, unsigned int pin)
+{
+       return -ENXIO;
+}
+
+static void elba_spics_set_value(struct gpio_chip *chip,
+               unsigned int pin, int value)
+{
+       struct elba_spics_priv *p = gpiochip_get_data(chip);
+       unsigned long flags;
+       u32 tmp;
+
+       /* select chip select from register */
+       spin_lock_irqsave(&p->lock, flags);
+       tmp = readl_relaxed(p->base);
+       tmp = (tmp & ~SPICS_MASK(pin)) | SPICS_SET(pin, value);
+       writel_relaxed(tmp, p->base);
+       spin_unlock_irqrestore(&p->lock, flags);
+}
+
+static int elba_spics_direction_input(struct gpio_chip *chip, unsigned int pin)
+{
+       return -ENXIO;
+}
+
+static int elba_spics_direction_output(struct gpio_chip *chip,
+               unsigned int pin, int value)
+{
+       elba_spics_set_value(chip, pin, value);
+       return 0;
+}
+
+static int elba_spics_probe(struct platform_device *pdev)
+{
+       struct elba_spics_priv *p;
+       struct resource *res;
+       int ret;
+
+       p = devm_kzalloc(&pdev->dev, sizeof(*p), GFP_KERNEL);
+       if (!p)
+               return -ENOMEM;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       p->base = devm_ioremap_resource(&pdev->dev, res);
+       if (IS_ERR(p->base)) {
+               dev_err(&pdev->dev, "failed to remap I/O memory\n");
+               return PTR_ERR(p->base);
+       }
+       spin_lock_init(&p->lock);
+       platform_set_drvdata(pdev, p);
+
+       p->chip.ngpio = 4;      /* 2 cs pins for spi0, and 2 for spi1 */
+       p->chip.base = -1;
+       p->chip.direction_input = elba_spics_direction_input;
+       p->chip.direction_output = elba_spics_direction_output;
+       p->chip.get = elba_spics_get_value;
+       p->chip.set = elba_spics_set_value;
+       p->chip.label = dev_name(&pdev->dev);
+       p->chip.parent = &pdev->dev;
+       p->chip.owner = THIS_MODULE;
+
+       ret = devm_gpiochip_add_data(&pdev->dev, &p->chip, p);
+       if (ret) {
+               dev_err(&pdev->dev, "unable to add gpio chip\n");
+               return ret;
+       }
+
+       dev_info(&pdev->dev, "elba spics registered\n");
+       return 0;
+}
+
+static const struct of_device_id ebla_spics_of_match[] = {
+       { .compatible = "pensando,elba-spics" },
+       {}
+};
+
+static struct platform_driver elba_spics_driver = {
+       .probe = elba_spics_probe,
+       .driver = {
+               .name = "pensando-elba-spics",
+               .of_match_table = ebla_spics_of_match,
+       },
+};
+module_platform_driver(elba_spics_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Elba SPI chip-select driver");
-- 
2.17.1

Reply via email to