Hello!
On 05.03.2021 12:02, Chunfeng Yun wrote:
Tune the boundary for FS/LS ESIT due to CS:
For ISOC out-ep, the controller starts transfer data after
the first SS; for others, the data is already transfered
Transferred.
before the last CS.
Signed-off-by: Chunfeng Yun <chunfeng....@mediatek.com>
---
drivers/usb/host/xhci-mtk-sch.c | 24 +++++++++++++++++++-----
1 file changed, 19 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index 8950d1f10a7f..e3b18dfca874 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c
@@ -513,22 +513,35 @@ static void update_sch_tt(struct usb_device *udev,
list_del(&sch_ep->tt_endpoint);
}
+static u32 get_esit_boundary(struct mu3h_sch_ep_info *sch_ep)
+{
+ u32 boundary = sch_ep->esit;
+
+ if (sch_ep->sch_tt) { /* LS/FS with TT */
+ /* tune for CS */
+ if (sch_ep->ep_type != ISOC_OUT_EP)
+ boundary += 1;
Why not:
boundary++;
+ else if (boundary > 1) /* normally esit >= 8 for FS/LS */
+ boundary -= 1;
boundary--;
[...]
MBR, Sergei
