On Fri, Feb 19, 2021 at 11:04:38AM +0100, Martin Kepplinger wrote:
> From: Angus Ainslie <an...@akkea.ca>
>
> These sections should be read only as they contain important data.
>
> Signed-off-by: Angus Ainslie <an...@akkea.ca>
> Signed-off-by: Martin Kepplinger <martin.kepplin...@puri.sm>
> ---
> .../boot/dts/freescale/imx8mq-librem5.dtsi | 17 +++++++++++++++++
> 1 file changed, 17 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> index c2bbbdeb93e3..d39ae27c8e42 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi
> @@ -258,6 +258,23 @@
> compatible = "jedec,spi-nor";
> reg = <0>;
> spi-max-frequency = <1000000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + partition@0 {
> + label = "protected0";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> + partition@30000 {
> + label = "protected1";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
Please have a newline between nodes.
I fixed it up when applying.
Shawn
> + partition@40000 {
> + label = "rw";
> + reg = <0x40000 0x1C0000>;
> + };
> };
> };
>
> --
> 2.20.1
>
