The NT39016 panel is a fun beast, even though the documentation states
that the CS line is active-low, it will work just fine if the CS line is
configured as active-high, but it won't work if the CS line is forced
low or forced high.
Since it did actually work with the spi-cs-high property, this is not a
bugfix, but we should nonetheless remove that property to match the
documentation.
Signed-off-by: Paul Cercueil <p...@crapouillou.net>
---
arch/mips/boot/dts/ingenic/gcw0.dts | 1 -
1 file changed, 1 deletion(-)
diff --git a/arch/mips/boot/dts/ingenic/gcw0.dts
b/arch/mips/boot/dts/ingenic/gcw0.dts
index bc72304a2440..f4c04f2263ea 100644
--- a/arch/mips/boot/dts/ingenic/gcw0.dts
+++ b/arch/mips/boot/dts/ingenic/gcw0.dts
@@ -345,7 +345,6 @@ nt39016@0 {
spi-max-frequency = <3125000>;
spi-3wire;
- spi-cs-high;
reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
--
2.30.1
